'07 Audi Q7 3.6L premium middle row seat removal

[Influxvisions]

Hi guys, I need to replace the fuel filter on my Audi Q7, it is under the middle seat, i got the full row seat that is divided in driver side 2/3 and passenger side 1/3, I just cannot figure out how to remove it, did anyone have a tutorial or some guidance how to do it? Thanks in advance.

Sent from my SM-G928T using Tapatalk

[Javier Neog]

Sure I did it once before to get rid of some noise.

All you have to do is to pull the seat upwards. It is very, very tight so make sure you are pulling from a very solid part of the seat. You can try by pulling at one of the edges. Dont pull the entire structure, just the laether seat. If you can't do it from the edge, try in the front-middle of the seat. It has 2 latches. And belive me, they are so tight you may need help from another.

Try posting a picture and I can tell you more details.

[Influxvisions]

I just got the Bentley DVD and says exactly the way you suggested, thanks! It also says to replace the grommets that hooks the seat down, but mine still grab fine, so I reused them.

Sent from my SM-G928T using Tapatalk

[Influxvisions]

I removed so I can access the fuel filter, it was giving me a code for low pressue detected on the injectors, so I replace the fuel filter, and problem solved, the Q7 only has 70,000 andnnow runs like new.

Sent from my SM-G928T using Tapatalk

[Javier Neog]

Thanks god for the DIY scans

Glad to heart that!