Q7 (4M) Coding

[andyhud007]

I dit it. It's working! I didn't have to code 09 since I have electric steering column with memory and it was already factory coded. But after coding 36 (driver seat) the full Easy Entry started to work. Driver's seat also moves back.
Thanks Andy.

Pleasure!

[Timar]

Hi Andy,

Is it possible to code easy entry for passenger seat?

Regards

[andyhud007]

Hi Andy,

Is it possible to code easy entry for passenger seat?

Regards

Might be, but not tested. Try the same Bit that I've listed for Module 36 but do it in module 06 which is the passenger side

Andy

[Timar]

Thank you, will try!!

Marko

[Retom]

.....and let us know the results.

[Retom]

Might be, but not tested. Try the same Bit that I've listed for Module 36 but do it in module 06 which is the passenger side

Andy

I have tested it in my car. It also works for passenger seat. As you Andy suggested: module 06 the same bit. Please note that I have the passenger seat with the memory. No idea if it works also when you have the seat without memory.

[Timar]

Hi Andy,

I Enabled ability to lock car with Engine running and noticed that my Q7 can be locked via the lock button on the keyfob and the button on the door (I have convenience key), but can't be unlocked via sensor on door handle (convenience key). It can be unlocked only via unlock button on the keyfob.

Do you know is it normal behavior not to be able to unlock car via sensor on the door handle?

Thank you!

Regards

Marko

[andyhud007]

It's normal behaviour when the engine is running. Correct.

[Timar]

Thank you on quick reply!
Do you know reason why car can be locked via door sensor and can’t be unlocked via door handle?

[srbsq7]

Probably a good security feature! I don’t mind this behaviour.