Notices
 

  

User Tag List

Thread: Q7 (4M) Coding

Page 63 of 63 FirstFirst ... 1353616263
Results 621 to 627 of 627
  1. Re: Q7 (4M) Coding - Last Updated 3rd March 2019 
    Join Date
    Feb 2016
    Location
    Ljubljana
    Posts
    27
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    5 Post(s)
    Quote Originally Posted by andyhud007 View Post
    Thanks Sander, appreciate you sharing this info

    You are more than likely right, but in the UK its all enabled as standard which is why I dont think we picked up on these extra adaptation channel changes

    At the most though you should only need to active these 2:



    Car_Function_Adaptations_Gen2-menu_display_seat_configuration
    Car_Function_Adaptations_Gen2-menu_display_seat_configuration_over_threshold_hig h

    Not the other 3.

    Thanks for sharing

    Andy
    Hello,

    I also checked those adaptation and it was all set to enable, but still get no easy entry funciton (I am trying to code my seats without any memory funcition on the car eather on driver or passenger side).

    Hope there is an option to enable it on my car, since easy entry function lika already said randomly works on the passenger side (some times it is not working at all, some times the seat only comes back, but not return to the original position, sometimes it works like it should, going back and returning to the original position).

    Have a great day.
     
    0 0 0
     

  2. Re: Q7 (4M) Coding - Last Updated 3rd March 2019 
    Join Date
    Apr 2020
    Location
    Perth, Australia
    Posts
    9
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1 Post(s)
    Hello all & thanks Andy for the thread.

    I have a 2019 Touareg III running on the same MLBevo platform in Australia , and have hit the same brick wall regarding TSR (VZA) enablement using only VCDS with HEX-NET.
    I am going to invest in a VCP now to do the parameterisation of the A5 camera.

    Some successful coding I have done so far as follow, which may be of interest to some?

    Module Byte Bit Desc Result
    09 Cent. Elect. 02 02 drl_break_active DRL's switch off when in P & Elec. brake on
    09 Cent. Elect. 02 03 sl_at_drl,active Rear tails on with DRL
    46 Central Conv. 21 05 high brake light to indicate virtual pedal trigger (emergency braking) also momentery on with foot gesture boot opening
    5F Information Electr. 23 01 Initial disclaimer _on switch off "nag screen" …..please follow traffic regulations at all times.
     
    0 1 0
     

  3. Re: Q7 (4M) Coding - Last Updated 3rd March 2019 
    Join Date
    Apr 2020
    Location
    Perth, Australia
    Posts
    9
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1 Post(s)
    Forgot this one too.........

    Module Byte Bit Desc Result
    13 Auto Dist. Reg 02 05 Overtaking right prevention Switches off RH Lane front vehicle detection / ACC allows undertaking
     
    0 1 0
     

  4. Re: Q7 (4M) Coding - Last Updated 3rd March 2019 
    Join Date
    Mar 2010
    Location
    UK
    Posts
    2,244
    Post Thanks / Like
    Mentioned
    31 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    208 Post(s)
    Quote Originally Posted by evadT3CR View Post
    Hello all & thanks Andy for the thread.

    I have a 2019 Touareg III running on the same MLBevo platform in Australia , and have hit the same brick wall regarding TSR (VZA) enablement using only VCDS with HEX-NET.
    I am going to invest in a VCP now to do the parameterisation of the A5 camera.

    Some successful coding I have done so far as follow, which may be of interest to some?

    Module Byte Bit Desc Result
    09 Cent. Elect. 02 02 drl_break_active DRL's switch off when in P & Elec. brake on
    09 Cent. Elect. 02 03 sl_at_drl,active Rear tails on with DRL
    46 Central Conv. 21 05 high brake light to indicate virtual pedal trigger (emergency braking) also momentery on with foot gesture boot opening
    5F Information Electr. 23 01 Initial disclaimer _on switch off "nag screen" ..please follow traffic regulations at all times.
    Thanks for sharing. Yes you need vcp for VZE. Good luck.
    Q7 272PS | ABT Tuned to 325PS / 680Nm | Tech Pack | Dyn Pack | Matrix | Pan Roof | Trailer | Drv+Pass Mem Seats | TV | NightV | BOSE | DVD Chger | Homelink | Soft Doors | Heat+Snd Ins Glass | Priv Glass | Heat W/Screen | Heat Steer Wheel | Adv Key | Elec Boot Cover | Elec Steer Column | Side Assist | Air Susp | Ambient Light | Heat+Fold Mirrors | Park Assist Pack | Adv TPMS | Load Fix Kit | Black Turbine Alloys | Matte Black Wrap | ABT Door Leds
     
    0 0 0
     

  5. Re: Q7 (4M) Coding 
    Join Date
    May 2020
    Location
    usa
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)
    Quote Originally Posted by andyhud007 View Post
    -----------------------------------------------------------------------

    Seat Symmetry + Passenger Seat Control

    Description: For Q7 (4M) cars that have BOTH Driver and Passenger memory seats installed (with the buttons in the doors) you can make both the drivers seat and passenger seat "line up" so they are symmetrical. In addition, you can move the passenger seat using the seat movement buttons on the drivers seat. This change enables these features if you have ONLY Driver Memory Seat installed
    Notes: Not been tested on Q7 4M cars that have neither driver or driver/passenger memory seats installed but it should work. You need to do the SAME coding in Modules 06 and 36.
    Usage: Once coded, go into MMI, Car / Vehicle Settings / Seats. A new option for Passenger Seat will have appeared. There will be 2 options inside. One to line both front seats up together, and the other to move the passenger seat with the driver seat movement buttons
    Risk: Low

    Coding:

    1. Module 06 - Passenger Seat Module & Module 36 - Driver Seat Module
    2. Coding
    3. Long coding
    4. Long coding helper (VCDS)
    5. Byte 2
    6. Tick "Bit 5"
    7. Byte 6
    8. Tick "Bit 1"
    9. Exit
    10. Do It


    Coding Screenshot 1
    Coding Screenshot 2

    Screenshots of Seat Symmetry Enabled
    Video of Seat Symmetry working without Passenger Memory Seat buttons installed

    -----------------------------------------------------------------------


    Attachment 31905
    I can't find module 6 in my 2018 Q7. Any idea why?
     
    0 0 0
     

  6. Re: Q7 (4M) Coding - Last Updated 22/11/2016 
    Join Date
    May 2020
    Location
    usa
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)
    you ever figure out where module 6 can be found? I have the same issue.
     
    0 0 0
     

  7. Re: Q7 (4M) Coding - Last Updated 3rd March 2019 
    Join Date
    Mar 2010
    Location
    UK
    Posts
    2,244
    Post Thanks / Like
    Mentioned
    31 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    208 Post(s)
    Audi changed the seat wiring from 2018 models onwards. If you didn't order passenger memory seats from factory then they didn't install the seat module under the seat.(module 06)

    Take a look under your driver seat. On the underside of the seat you'll see a box with plugs in it. (Module 36). Now go look under your passenger seat, there won't be one.

    Cheers

    Andy
    Q7 272PS | ABT Tuned to 325PS / 680Nm | Tech Pack | Dyn Pack | Matrix | Pan Roof | Trailer | Drv+Pass Mem Seats | TV | NightV | BOSE | DVD Chger | Homelink | Soft Doors | Heat+Snd Ins Glass | Priv Glass | Heat W/Screen | Heat Steer Wheel | Adv Key | Elec Boot Cover | Elec Steer Column | Side Assist | Air Susp | Ambient Light | Heat+Fold Mirrors | Park Assist Pack | Adv TPMS | Load Fix Kit | Black Turbine Alloys | Matte Black Wrap | ABT Door Leds
     
    0 1 0
     

Page 63 of 63 FirstFirst ... 1353616263

Similar Threads

  1. Help with some coding please
    By troytroy in forum VCDS - General Questions
    Replies: 1
    Last Post: 07-02-2020, 12:42 PM
  2. C6 coding
    By simonrk57 in forum VCDS - General Questions
    Replies: 2
    Last Post: 18-03-2013, 08:10 PM
  3. coding - how to get this!
    By Touran200409021 in forum VCDS - Help Requests
    Replies: 7
    Last Post: 12-09-2011, 10:47 PM
  4. Coding help
    By phil miller in forum VCDS - Help Requests
    Replies: 0
    Last Post: 24-03-2011, 12:01 AM
  5. Help with coding please.
    By benjie in forum VCDS - Help Requests
    Replies: 8
    Last Post: 27-08-2010, 02:21 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


 



  


Disclaimer: VW Audi Forum is an "independant enthusiast website", administered in line with guidelines supplied by VAG in the UK, and is in no way related to any of the Worldwide Volkswagen,Audi,Seat,Skoda,Bentley,Bugatti,Porsche or Lamborghini group of Companies. For official up to date information on any of there vehicles, please visit the official websites. Any comments made throughout this website, are the views of the respective poster, and in no way represent the views of the VW Audi Forum Administration, or the worldwide Volkswagen & Audi Group of companies.


VW Audi Forum do not vet and are not responsible for any information which is posted in this forum. All content is viewed and used by you at your own risk and we do not warrant the accuracy or reliability of any of the information.


Copyright: Certain "words", "phrases" and "Images" used on this website by the Administration are "Copyright" of Volkswagen GB, Volkswagen AG (Germany), Audi GB, Audi AG (Germany), Volkswagen Motorsport GB, Volkswagen Motorsport AG (Germany), Audi Motorsport AG (Germany), Volkswagen Racing GB, Bentley, Bugatti, Porsche and Lamborghini. No image can be replicated by anyone WITHOUT the relevant Companies written permission.


All trademarks and copyrights remain property of their respective owners.

No part of the VW Audi Forum website or forum may be reproduced without written permission from the site administration


PLEASE NOTE - PERSONAL ABUSE, ABUSE AGAINST THIS OR ANY OTHER WEBSITE OR ANY COMPANY WILL NOT BE TOLERATED. OFFENDERS WILL BE MODERATED OR EVEN BANNED.


This website and forum are best viewed at a minimum resolution of 1024 by 768.



  



- VW AUDI Forum - The #1 Volkswagen (VW) Group Forum - Volkswagen (VW) - Audi - Seat - Skoda - Bentley - Bugatti - Lamborghini - Porsche - Scania - MAN - Ducatti - VW Audi Forum -


- www.vwaudiforum.co.uk - www.vwaudiforum.co.uk -





free web
stats