Q7 (4M) Coding

[ajtaylor82]

I have a full VCP license and apparently they have a script/ZDC now for enabling TSR on countries that offer TSR from factory. I'll check the file later today to see what it refers too but it may be now just a matter of running this script via VCP to enable TSR (!)

Andy

Any luck Andy?


SQ7 (my17) 4.0L 435PS, Glacier White, Titanium Black Pack, 22” 5-V-Spoke Alloys, Virtual Cockpit, Pano Roof, BOSE sound, Head Up Display, All-wheel steering, Phone Box, Audi Park System Plus with Park Assist and Surround Camera, Pre Sense City and Rear with Side Assist, Memory Seats, Red Callipers, Flat Bottom Steering Wheel.

[andyhud007]

Sorry not had a chance to check yet. I'll look today and report back.

Andy.

[andyhud007]

TSR Script:

Well, here it is... If anyone wants to come to me to try it then your more than welcome!


2018-04-23_10-47-07.jpg

[ajtaylor82]

TSR Script:

Well, here it is... If anyone wants to come to me to try it then your more than welcome!


2018-04-23_10-47-07.jpg

Where are you again Andy? It might be later in the year as I’m not down sawf until the summer.


SQ7 (my17) 4.0L 435PS, Glacier White, Titanium Black Pack, 22” 5-V-Spoke Alloys, Virtual Cockpit, Pano Roof, BOSE sound, Head Up Display, All-wheel steering, Phone Box, Audi Park System Plus with Park Assist and Surround Camera, Pre Sense City and Rear with Side Assist, Memory Seats, Red Callipers, Flat Bottom Steering Wheel.

[andyhud007]

Near Gatwick mate... down sawwwwwwwwwwwfffffffff

[nbedford]

I have finally got around to purchasing VCP and I can confirm that I have successfully been able to enable traffic sign recognition on my car.

However, the script @andyhud007 mentions above is only the coding part of things (modules 17, A5 and 5F) that on it's own was not sufficient. As others have speculated, but I'd never actually seen any concrete evidence the camera module also needs the correct dataset loaded.

VCP have dataset's available that support the A5 module with index C and D for the Q7 4M (my car has a D). These are available in .flash files (not .zdc containers to be used with their one click guided functions) and have to be written using the VCP flashing option. It was a little bit of a step into the unknown, but in the end it all worked out.

Even if I never use VCP for anything else (I'm certain I will ) the way I see it is this works out better value for money than the single use Kufatek dongle which appears to be the other method people have used for TSR/VZE.

I'm happy to help others (at their own risk!) but I'm even further down sawwwwwwwwwwwfffffffff than andy.

[andyhud007]

Awesome work mate! So glad you got it working.

Least you have confirmed 100% that we were on the right track that a script (which changes coding) + the A5 Dataset is required to enable TSR. (A5 by the the way is the Module Code for the camera in the windscreen on the Q7 4M).

You'll defo use VCP for other stuff. I find I'm using it more and more.

great work and thanks for sharing!

Andy

[nykhelos]

It is possible to set easy exit where the seat moves back on door opening and comes on memory set position once ignition on even without the electrical steering column but I did it through the App on OBDeleven it is 10 coins...

[andyhud007]

It is possible to set easy exit where the seat moves back on door opening and comes on memory set position once ignition on even without the electrical steering column but I did it through the App on OBDeleven it is 10 coins...

Thanks for sharing this. Yes I can confirm This is possible via coding changes without needing the electric steering column.

[Retom]

Thanks for sharing this. Yes I can confirm This is possible via coding changes without needing the electric steering column.

Hi Andy,
How to do this coding with VCP? I was trying to do this several times but not successfully. I have the electric steering column.