Golf 1.6 AKL Compression Results

[mike199025q]

More that the bores are glazed and this will encourage oil consumption.

I deglazed them though before fitting rings, how can they be glazed already?

[Crasher]

Which oil did you use?

[mike199025q]

Which oil did you use?

I used Millers CRO

[Crasher]

For how long or are you still on it? Do you have a picture of the bores after you honed them, they should have had a satin finish with a 45 degree cross hatch using a 220 ish grit stone and looked like this



This are good original bores

[mike199025q]

Yes still running that oil not done any miles just been letting it idle and occasionally revving it. No blue smoke just like a white steam/smoke from exhaust that smells like fuel,o2 sensor? And posted the pics of the honed cylinder on this thread and was told they are good

[Aldino]

Crasher, you're God sent. Thanks for keeping this thread active with continuous positive and to the T advice.

I'm about to embark on the same journey. Hoping it won't take 2 years🙈

[Crasher]

Me, positive, that's a first....