A6 Mist Washer Jets

[s114hed]

Ah bugger! Well I'm sure you'll find a way! Also is it a direct replacement? Shouldn't take more then 5mins to change if so


Sent from my iPhone using Tapatalk

[Guest 2]

30 seconds each side. Don't think theres a way round it unless you cut the bonnet (!).

[s114hed]

Hmmm maybe try and turn the sprayer 180 degrees as it originally meant to be on the scuttle panel and not upside down on the bonnet.


Sent from my iPhone using Tapatalk

[Guest 2]

You can't, its one complete unit.

[s114hed]

Found this on Audi sport




Sent from my iPhone using Tapatalk

[Guest 2]

Thats for the prefacelift A3 and A4 B7 which has the wrong sized recess. The A6s recess is fine, no gluing needed.

[k992061]

This is probably me being a little dim, on a A6 C6 does this fit properly?

[Guest 2]

This is probably me being a little dim, on a A6 C6 does this fit properly?

Ok sitrep, they do fit and they do work but as the A6s are mounted on the bonnet rather than the scuttle for the B5 and A3 the bonnet is blocking some of the spray even with the nozzle screwed right up (any further down the wiper arm blocks the spray!)

In case you missed it.

[Pilotdavo]

Does anybody have a part number for these fan spray alternatives to the 3 pistol type I have currently? They keep getting blocked.

[M1tchy]

Have a look at the A7 section. Part is the same, I wrote a how to on there which I think is a sticky


Sent from my iPhone using Tapatalk Pro