Traffic sign recognition nearly coded

[hulasty]

I flashed the 8e driver on 4G0907107E
I wrote to the VCP support for ZDC to "E" We will see what they will answer.

[smallpii]

Activate successfully with VCDS!
Traffic signs display is working~
2012 A6 4G c7 TDI
Thanks for your help ^^

image1.jpg

image2.jpg

image3.jpg

image4.jpg

[Dangerell]

Cool!

Can you please provide all coding steps for this? I want to do the same on my A8L 4H 2011.

Thank you!

[smallpii]

Cool!

Can you please provide all coding steps for this? I want to do the same on my A8L 4H 2011.

Thank you!

There are just 3 steps have to do on My 2012 a6 c7 (RMC MMI).

I can see the options is like "Traffic sign Recognize ...... installed" in the 3 controllers.

- 8E Image Processing, Long Coding
- 82 HUD, Long Coding
- 17 Instruments, Long Coding

After actived, It is working ^^

Good luck and Enjoy it.

[watronik7]

OK guys. So far a lot of discussion about this topic but no results so it is time to reveal the secret. See my step by step guide here: Dropbox - Audi Traffic Sign Recognition Retrofit Guide rev1.pdf

Rev 01 added today 24.08.2018

[Premium]

Nice writeup/guide!! I had to buy the dongle to get mine to work, but I only got the vcds tool and not the other coding tool available..

Is it possible to get the other traffic signs showing? I only get speed limit signs. With vcds??

[watronik7]

So far on my local journeys I got only speed limits. But in adaptation channels they are options for:

- end of speed limit sign
- no overtaking sign
- supplementary signs e.g showing time when the speed limit is applicable or weather conditions

To change the above you can use VCDS only as per instructions in the guide.

I ended up buying VCP interface which was just a bit more expensive than Kufatec dongle and now I can use it for lots of other things above VCDS.

Sent from my GT-I9505 using Tapatalk

[AT.]

OK guys. So far a lot of discussion about this topic but no results so it is time to reveal the secret. See my step by step guide here: Dropbox - Audi Traffic Sign Recognition Retrofit Guide rev0.pdf

Wow, what a magnificent and quality Christmas gift, thank you

[watronik7]

Wow, what a magnificent and quality Christmas gift, thank you

Indeed, I did it over Christmas. Every little helps

Sent from my GT-I9505 using Tapatalk

[divxman]

Hello Watronik7,

I used your guide and my traffic sign recogntion is still not working. I still get "out of operational" area message. I am living in Slovenia, I have Audi A7 2010 with lane assist and adaptive cruise control and my 8E camera have the number 4g0907107b (so traffic sign should work). I have both VCP and VCDS so I did all the steps described in the guide. I have all the menus in the mmi and instrument cluster, but there is no traffic sign recognition working.

Have any idea?