Traffic sign recognition nearly coded

[audi100]

Yes I did :-)

Sent fra min E5823 via Tapatalk

[divxman]

I just want to know, why I would need to have vcp and why I can not do it with vcds? if there is just a coding problem then all we need to know is some adaptations, bit changes and mybe securitiy codes. Can you please share this?

[divxman]

Can somebody please give some more infos about enebeling traffic sign recognition? I do not own a VCP so I can not access the forum in a previous post from user audi100.

[Dangerell]

Yes I did :-)

Sent fra min E5823 via Tapatalk

Hi there,

Congratz! Can you please help me activate it too on my A6 4G MMI 3G+?

I did my best on other topic but got stuck, i think something is missing in activating the area (Europe).

A6 C7 VCDS Tricks - Page 64

Thank you!

[itwasntme187]

@audi100 HI, I have VCP but unable to find the info to enable the Traffic Recognition.. can you help?

[malexgti]

Hello,

First of all sorry if my english is bad, because it is not my native language.

I am trying to activate traffic sign recognition or VZE on audi a6 c7 and on audi a7 for some time now but with no sucess. From all forums that I visited, this thread has the most informations about activating traffic sign recognition, so I decided to share my researches:

- I speak with the our local dealer for kufatec and I learned that this dongle is basicly an diagnostic tool, that you connect to the obd computer, and the coding is sent to the car. So basicly there is just the coding for activation of the traffic sign recognition and it should be done only with coding.
- I found a lot of settings for traffic sign recognition in 8E controller>Adaptation menu. A lot of things regarding traffic sign recognition is set to "not active", but i can not activate it, because I do not have security access code (security code 20103 only work for adaptations regarding to lane assist). Maybe M1tchy can post what he has enabeled in 8E adaptation, after he used kufatec dongle. And please post the security code if someone have it.
- I found a german forum, where some guy name scotty18 claimed that he activated traffic sign recognition using original audi diagnostic tool with parameterization of the camera 8E (I only read this thread with google translate, so I mybe did not understand this right). I have access to the original audi diagnostic tool, but I do not know where to start this parameterization, because I never done that. Any info about that would be nice.

Any other information from other useres would be helpful.

Have a nice day

- that security code 20103 is only for codding
- for adaptations try s1234 or s12345

Good luck!

[audi100]

@audi100 HI, I have VCP but unable to find the info to enable the Traffic Recognition.. can you help?

Hi
IT is all at the Engish VCP forum, good luck😁

Sent fra min E5823 via Tapatalk

[stifii]

Hello,

Just to say that I do not recomend that you set your map do default in green menu like i said in post #114, because I had a lot of troubles getting my navi back to work normaly.

Hi,
How do You activate back navi? I've changed to default and after that changed to my proper region and after restart navi still not working. It says: navigation is initialising...

[AT.]

Hi,
How do You activate back navi? I've changed to default and after that changed to my proper region and after restart navi still not working. It says: navigation is initialising...

I had this feeling, and I found I changed the MAP REGION to "Default" or something like this. There are TWO sections in the green menu (I don't remember, may check for you if you will not find) which refers to the region settings, BOTH OF THEM should be the same, as in other cases, the NAV will stuck just like you mentioned.

I hope it helps you to solve the problem.

[stifii]

If someone changed Map Region and NAVI doesn't work sollution is - changing Map Region to the original setting, and reinstalling map.

After few months I've done retrofitting traffic sign recognition, and both works navi and VZE. The things what must to do is that what someone earlier wrote - parametrization with VCP must be done and everything works. But now I've got only error on Board Computer in error section which means "speed limit display : currently restricted", but signs ares shown etc.

Have somebody idea how to loose this error?