Notices
 

  

User Tag List

Thread: Quiescent current stage 1 & 2 intermittent

Page 15 of 15 FirstFirst ... 5131415
Results 141 to 148 of 148
  1. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    Nov 2016
    Location
    england
    Posts
    158
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    33 Post(s)
    Quote Originally Posted by rjsdavis View Post
    I have indeed - this forum was the only place on the net that I can find, that comes anywhere close to similar electrical problems.

    I can't the same problem on an A6, anywhere else. :-(
    I came across some old threads on here when I googled they were from around 2012 and were for the a6. Pistonheads came back with some results too but not sure if they were for the a6 didn't have time to read through them but will go through them for you when I have some free time hopefully we will get our cars sorted at somepoint, audi's are great cars unfortunately they seem to come with some problems here or there (newish cars apparently no exception from what I've come across)
     
    0 0 0
     

  2. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    Nov 2016
    Location
    england
    Posts
    158
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    33 Post(s)
    Quote Originally Posted by rjsdavis View Post
    I have indeed - this forum was the only place on the net that I can find, that comes anywhere close to similar electrical problems.

    I can't the same problem on an A6, anywhere else. :-(
    Have you tried the tests available in VCDS I.e output tests, optical bus diagnostics (I'm not good with all this electrical stuff but test functions was just a thought)
    I've tried to do my battery coding tonight........ How did you get on with yours? I did what I was told to do in the ross tech wiki and after clicking on do it I got this message come up: re-code invalid this appears to be a uninitiated control module.
    Do you have any ideas on what that's about or what I'm doing wrong?
     
    0 0 0
     

  3. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    May 2017
    Location
    Canterbury, Kent
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    46 Post(s)
    Quote Originally Posted by Nard666 View Post
    Have you tried the tests available in VCDS I.e output tests, optical bus diagnostics (I'm not good with all this electrical stuff but test functions was just a thought)
    I've tried to do my battery coding tonight........ How did you get on with yours? I did what I was told to do in the ross tech wiki and after clicking on do it I got this message come up: re-code invalid this appears to be a uninitiated control module.
    Do you have any ideas on what that's about or what I'm doing wrong?
    I haven't tried those tests within VCDS, as to be honest, whilst I computer super-user, I'm still a novice with VCDS! I don't particularly know what I'm looking for, or looking at to know whether the data is right or wrong! I'm sure it might well be in there though, and you're probably on the right lines.

    With respect to the battery coding, I couldn't do it either. VCDS is so limited in terms of battery manufacturer's that you can choose from; Excell and some others, I wasn't able to input the data at all from the battery I got from TPS, as Yuasa isn't a manufacturer option - which is strange given that Yuasa is now the preferred/recommended battery supplier to the VAG/TPS group! In the end, all I could think to do was leave the original Audi OEM battery data in situ, and change the code data with one digit to hopefully "notify" the car's system that a new battery had been installed. Couldn't find a better solution or alternative option online from looking either....
     
    0 0 0
     

  4. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    Nov 2016
    Location
    england
    Posts
    158
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    33 Post(s)
    Quote Originally Posted by rjsdavis View Post
    I haven't tried those tests within VCDS, as to be honest, whilst I computer super-user, I'm still a novice with VCDS! I don't particularly know what I'm looking for, or looking at to know whether the data is right or wrong! I'm sure it might well be in there though, and you're probably on the right lines.

    With respect to the battery coding, I couldn't do it either. VCDS is so limited in terms of battery manufacturer's that you can choose from; Excell and some others, I wasn't able to input the data at all from the battery I got from TPS, as Yuasa isn't a manufacturer option - which is strange given that Yuasa is now the preferred/recommended battery supplier to the VAG/TPS group! In the end, all I could think to do was leave the original Audi OEM battery data in situ, and change the code data with one digit to hopefully "notify" the car's system that a new battery had been installed. Couldn't find a better solution or alternative option online from looking either....
    I know what you mean, I'm not good with computers and am also a novice with VCDS, there is a downloadable user manual which explains the tests , I stumbled across it accidentally but I'm sure if you Google ross-tech VCDS user manual it would come up on the search, hope this helps. Yeah I've watched my hazard warning triangle fade and go off I've not timed it but it doesn't take long.
    Yes that's what I want to do just change the last digit on the serial number, my battery is a bosch which is made by varta which is the manufacturer used on our cars originally but I don't have a bem sticker so can only change the last digit like that but when I tried I got the message saying recode invalid control module uninitiated though I had followed what ross-tech had done in the video
     
    0 0 0
     

  5. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    May 2017
    Location
    Canterbury, Kent
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    46 Post(s)
    Quote Originally Posted by Nard666 View Post
    but I don't have a bem sticker
    I had the exact same issue - hence simply changing a single digit on the existing code that was already present in the system. It updated without any issue, but I'm completely unaware if it actually made any difference at all!
     
    0 0 0
     

  6. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    Nov 2016
    Location
    england
    Posts
    158
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    33 Post(s)
    Quote Originally Posted by rjsdavis View Post
    I had the exact same issue - hence simply changing a single digit on the existing code that was already present in the system. It updated without any issue, but I'm completely unaware if it actually made any difference at all!
    Yeah that's what I intended to do but it wouldn't let me, got the message re-code invalid this module appears to uninitiated instead though I think I've now sussed that one from scouting about online it appears that either the module is new or it hasn't had a battery adapted to it previously after the original battery was put into the car, what you then do is input a code of something like 12345 as the workshop code (must be done on the control module screen, can be done in vcds under options but it would only let you do it once and it stays that way so you wouldn't be able to run vcds in stealth mode, do it on the module screen and you are still running in stealth mode) then it will let me do it.
    Did you look for the vcds users manual? It's quite informative.... To a certain degree
     
    0 0 0
     

  7. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    May 2017
    Location
    Canterbury, Kent
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    46 Post(s)
    Quote Originally Posted by Nard666 View Post
    Did you look for the vcds users manual? It's quite informative.... To a certain degree
    Yes, I've downloaded it, but not yet had time to actually read it... !
     
    0 0 0
     

  8. Re: Quiescent current stage 1 & 2 intermittent 
    Join Date
    May 2017
    Location
    Canterbury, Kent
    Posts
    143
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    46 Post(s)
    Up until Friday, everything within the MMI system was working fine. On the very odd occasion, the lights within the MMI control panel in the centre console would not light up when the car was started, but re-starting the engine would always solve this. It would happen probably 2-3 times per year.

    Last Friday, it happened again, and an engine restart fixed this and caused the control panel lights to come on. However, this time, whilst driving the car and during the journey, the lights in the control panel just went out, but this time, it caused the screen in the dashboard to turn off as well. Curiously, my phone was still connected to the system via Bluetooth, and it continued to stream and play music even though the MMI panel and screen were off, however, the volume was fixed and neither the volume button on the MMI control panel, or the steering wheel could alter the music volume. It appeared to me that the MMI control panel had just died there and then. Nothing had been changed, no MMI updates, nothing had been spilled on it, and there's no water ingress in the MMI stack in the boot - it's as dry as a bone in there. It just died.

    During the rest of the day, engine restarts failed to make any difference, and the MMI control panel and screen has remained off ever since. I’ve done a full VCDS scan of the car, and the only faults showing are all MMI related, in that it simply says:

    07-Control Head -- Status: Cannot be reached 1100
    0E-Media Player 1 -- Status: Cannot be reached 1100
    37-Navigation -- Status: Cannot be reached 1100
    47-Sound System -- Status: Cannot be reached 1100
    56-Radio -- Status: Cannot be reached 1100

    Worse, the car wasn't used again until the Sunday morning. Come Sunday morning, the car battery was as flat as a pancake and would not turn over or even unlock from the key remote. It's clear that the system remained on for about 36 hours and completely drained the battery flat. It was charged all day Sunday, and the car started and runs fine and has done ever since. As a precaution, as the MMI system was down, I disconnected the large cable connector from the amp in the boot at the top of the stack, and the car system now shuts down in just a few minutes, and there is now no battery drain (you'll see above, that I have had drain issues for months!). The one positive to come out of this, is that the part-battery drain I've been trying to diagnose for months, is definitely, and without doubt caused from within the MMI system. I now never have any battery warnings on the dash when I go to start the car, the spotlights and rear lights always now come on when you unlock the car in the evenings even if she's been sitting around for a day or two (this didn't happen if the car had been left for a while, as the battery was part-draining, as it was taking the best part of 2-2.5 hours to shut down).

    All other systems are ok. I've become aware from research in the RossTech forums, that the MMI system optical bus is a big loop, with the CAN gateway as the starting point, going onto the control head, and then onto the individual MMI components finishing with the radio tuner and then coming back to the CAN gateway again. Given that the CAN gateway is reporting ok in the VCDS scan, does this automatically point to the Control Head as the culprit that is stopping the loop from going any further, as it is first in the "faulty" list and has taken out every other module in the loop that follows it? My gut feeling is that the control panel in the dash is the faulty unit anyway given what happened, and because it's actually faulty, then remained an open or live circuit after the car was shut down last Friday, causing the battery to drain - this all appears to be logical to me.

    Therefore, my question is; is the MMI control panel in the centre panel of the car, also the “Control Head” as reported by VCDS?

    Assuming that this is yes - I'll get onto getting a replacement control panel / control head asap. I'm watching one on eBay at the moment, and a quick question about compatibility... My car is a 2007 A6. On the control panel, the button below RADIO is MEDIA on mine. The one I'm watching has TV / CD on the button instead of MEDIA.

    I don't mind this, but would it be reasonable to expect any compatibility issues between the two?
     
    0 0 0
     

Page 15 of 15 FirstFirst ... 5131415

Similar Threads

  1. The next stage
    By Borab0y in forum Golf MK5 - 2004 - 2009
    Replies: 1
    Last Post: 10-09-2010, 09:22 PM
  2. APR Stage 3
    By solaris10 in forum 2.0T, TSI and TFSI - Engine
    Replies: 1
    Last Post: 18-08-2010, 01:32 PM
  3. stage 3 cutch
    By bez101 in forum Audi A4 - B7 Forum - 2005 - 2008
    Replies: 5
    Last Post: 20-11-2009, 10:16 PM
  4. Next stage complete
    By Borab0y in forum Audi A4 - B6 Forum - 2002 - 2005
    Replies: 5
    Last Post: 07-09-2009, 12:14 PM
  5. Anyone explain "stage 1" and "stage 2" torque settings?
    By jemthetaxi in forum Passat - B5 Forum - 1997 -2005
    Replies: 4
    Last Post: 03-07-2008, 09:41 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




  


Disclaimer: VW Audi Forum is an "independant enthusiast website", administered in line with guidelines supplied by VAG in the UK, and is in no way related to any of the Worldwide Volkswagen,Audi,Seat,Skoda,Bentley,Bugatti,Porsche or Lamborghini group of Companies. For official up to date information on any of there vehicles, please visit the official websites. Any comments made throughout this website, are the views of the respective poster, and in no way represent the views of the VW Audi Forum Administration, or the worldwide Volkswagen & Audi Group of companies.


VW Audi Forum do not vet and are not responsible for any information which is posted in this forum. All content is viewed and used by you at your own risk and we do not warrant the accuracy or reliability of any of the information.


Copyright: Certain "words", "phrases" and "Images" used on this website by the Administration are "Copyright" of Volkswagen GB, Volkswagen AG (Germany), Audi GB, Audi AG (Germany), Volkswagen Motorsport GB, Volkswagen Motorsport AG (Germany), Audi Motorsport AG (Germany), Volkswagen Racing GB, Bentley, Bugatti, Porsche and Lamborghini. No image can be replicated by anyone WITHOUT the relevant Companies written permission.


All trademarks and copyrights remain property of their respective owners.

No part of the VW Audi Forum website or forum may be reproduced without written permission from the site administration


PLEASE NOTE - PERSONAL ABUSE, ABUSE AGAINST THIS OR ANY OTHER WEBSITE OR ANY COMPANY WILL NOT BE TOLERATED. OFFENDERS WILL BE MODERATED OR EVEN BANNED.


This website and forum are best viewed at a minimum resolution of 1024 by 768.



  



- VW AUDI Forum - The #1 Volkswagen (VW) Group Forum - Volkswagen (VW) - Audi - Seat - Skoda - Bentley - Bugatti - Lamborghini - Porsche - VW Audi Forum -


- www.vwaudiforum.co.uk - www.vwaudiforum.co.uk -