Re: Audi A6 C6 Leather Seats Upgrade –
16-01-2013,02:04 PM
A simple google returned this....If your current car only has electric lumber support, there will only be 2 0.5mm wires going into the re plug under the seat base. One of these is battery live and the other is body earth. If you fit full electric seats, ie S4 Recaro you will have to replace the 2 0.5mm wires with 2.5mm wires. The pin designations are the same, just pick them out with a small screwdriver (or proper tool !!) Then run the 2 uprated 2.5mm wires straight to the terminal 30 connection under the relay plate on the drivers side, via a 20amp fuse. All of the electric seat functions, except heatinr anrcarried out by these 2 wires. If youwant to fit the heated seat loom, your best bet is to purchase the exact loom fro
www.kufatec.de for about £40. These plug into the heater control unit and then into the wiring plug under the seat. Easy job done. If you rally want to go mad, once you've fitted the heated seats, you can fit the heated steering wheel that runs off the drivers heated seat switch ! Even easier to wire up as you only run the small loom from the steering wheel control unit to the wheel itself andthen code up with the laptop !!!!
Hope this is of some help to someone.
Sounds a bit daunting, but if you need more info, PM
Cheers for now !!
However...
This will work but you wont get the memory seat function,load of crap if only you drive the car anyway.
But then again....
Agree with you but not all recaros had the memory function.
It's a little bit more tricky if you want memory as you will need the control unit and doors switches. Not impossible though !!!
Always up for a challenge :-)
Happy Days !
2018 (2017MY) S3 2.0TFSI Sportback Quattro S-Tronic in Nano Grey Metallic.
Black Edition, Reversing camera, Parking System Plus, Hill Hold, Super Sports seats, heated, Dipping exterior mirrors, B&O, Advanced Key, Magnetic Ride, Red Calipers, 19x8J 5-V-Spoke wheels in matte titanium.