1.9Tdi fuel filter check valve?
Hi
I have been asking this questions in every forum I can come up with - with no answers.
This is what has happened:
Im trying to get a Golf V 2007 1.9Tdi to start. It died intermittent during drive - but now it wont even start.
There are no fault codes.
Suspecting it could perhaps be the check valve in the lid on the fuel filter holder.
They are not easy to find - so Id like to find a picture on a working check valve. Any one have one, they could take a picture of (the inside of the filter holder)?
It has this number: 1K0127400K
And it is the type A.
Picture from Amazon: https://www.amazon.com/Genuine-OE-Vo.../dp/B00BIPTFKC
The day after this happened:
I have ordered a used fuel filter holder.
I can fill the fuel filter cup with fuel, with 12V directly on pump. Still couldnt start the engine yesterday.
Today I wanted to be sure the timing was correct and was ready to read measuring blocks during crank - when the bloody engine started!
Pump in tank went on when I turned ignition on, then engine started.
So I run inside to get low amp probe and SnapOn -> the tank pump was not running!
I took off the electric connector on tank pump and the engine continued to run!
I turned off the engine. Started it again, without tank pump connected.
The fuel filter holder will be run empty by the tandem pump.
Am I thinking correct here:
There must be a pressure switch in the fuel pump in the tank - that switches off when the fuel pressure is up in the fuel filter holder.
If a check valve in the filter holder lid is stuck closed - the pump in the tank will not turn on (its brand new).
But I cannot find ANY information on the check valve on a fuel filter holder modell A, where the valve is placed within the lid construction (and not the separate type placed above the lid, that can be changed separately).
The fuel pump in tank is changed and I have fitted an other used tandem pump, with the same results.
The fuel filter was changed shortly before this intermmitent engine stalling started. I checked inside the fuel filter holder couple days ago (when a friend mentioned the valve stucking for him, once he had changed filter, prohibiting him to start the engine, once the new filter house came, he could see the valve had different positions) - and could find that there was only diesel inside the filter when I lifted it up, no diesel inside the return hose or feed hose to tandem pump. When detatching the return hose, I felt there was vacuum.
So thats when I filled the filter cup with 12V directly on the tank pump. I put filter holder together and started electric pump with computer - and checked if fuel came out at tandem pump. It did. Thats when I changed tandem pump.
Activating the in-tank pump with computer only works if I have had the system open. But Im guessing that it has a pressure switch somewhere.
Here is a Autoscan - with a fault code from me disconnecting the electric connector:
Code:
Monday,16,November,2020,14:00:32:18201VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 20.4.2.0 (x64) HEX-V2 CB: 0.4513.4
Data version: 20200730 DS317.0
www.Ross-Tech.com
Dealer/Shop Name: Firma Johannes Bruun
Workshop Code: 000 02013 000000
VIN: WVWZZZ1KZ7W264681 License Plate: BWH469
Mileage: 263050km-163451mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 1K (1K0)
Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56
VIN: WVWZZZ1KZ7W264681 Mileage: 263050km-163451miles
00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
-------------------------------------------------------------------------------
Address 01: Engine Labels: 03G-906-016-BKC.clb
Part No SW: 03G 906 021 KG HW: 03G 906 021 AN
Component: R4 1,9L EDC 000SG 9244
Revision: --H07--- Serial number: VWZ7Z0G8112637
Coding: 0000071
Shop #: WSC 01392 785 00200
VCID: 6E85CCE2FC9374EBB0F-803A
No fault code found.
Readiness: 0 0 0 0 1
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1K0-907-379-MK70.lbl
Part No: 1K0 907 379 P
Component: ASR FRONT MK70 0105
Coding: 0017025
Shop #: WSC 01392 785 00200
VCID: 3FDB41A6EB79CD636B9-806A
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 1K0-820-047.lbl
Part No SW: 1K0 820 047 FT HW: 1K0 820 047 FT
Component: Climatic PQ35 141 0909
Revision: 00141027 Serial number: 00000000000000
Shop #: WSC 00000 000 00000
VCID: 7BA3F5B6BFE11143071-802E
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels:. 3C0-937-049-23-M.lbl
Part No SW: 3C0 937 049 AD HW: 3C0 937 049 AD
Component: Bordnetz-SG H52 2002
Revision: 00H52000 Serial number: 00000006938468
Coding: 08890F2700041500471400001400000000097B075C0001
Shop #: WSC 00000 785 00200
VCID: 6B83C5F6CF8181C3971-803E
Subsystem 1 - Part No: 1K1 955 119 E Labels: 1KX-955-119.CLB
Component: Wischer 180407 021 0501
Coding: 00038805
Shop #: WSC 00000
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 1K0-909-605.lbl
Part No SW: 1K0 909 605 T HW: 1K0 909 605 T
Component: 37 AIRBAG VW8 020 2300
Revision: 05020000 Serial number: 0038PD15ZV80
Coding: 0013111
Shop #: WSC 01373 785 00200
VCID: 3D273BAEE175DF73795-8068
Subsystem 1 - Serial number: 6332MSME177E4B65Q
Subsystem 2 - Serial number: 6342MSME17101C600
Subsystem 3 - Serial number: 6352QSME246D2369M
Subsystem 4 - Serial number: 6362QSME26724D7FY
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 1K0-953-549-MY8.lbl
Part No SW: 1K0 953 549 BB HW: 1K0 953 549 BB
Component: Lenksäulenmodul 036 0070
Coding: 0000002
Shop #: WSC 00011 768 00200
VCID: 73B3DD9697B159035F1-8026
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1K0-920-xxx-17.lbl
Part No SW: 1K0 920 853 Q HW: 1K0 920 853 Q
Component: KOMBIINSTRUMENT VDD 1610
Revision: V0003000 Serial number: VWZ7Z0G8112637
Coding: 0003103
Shop #: WSC 02013 222 99650
VCID: 38292ABACE57FA5BAA3-806C
1 Fault Found:
00771 - Fuel Level Sensor (G)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 75
Mileage: 263053 km
Time Indication: 0
Date: 2000.00.00
Time: 13:47:05
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels:. 1K0-907-530-V2.clb
Part No SW: 1K0 907 530 K HW: 1K0 907 951
Component: J533__Gateway H04 0021
Revision: H04 02 Serial number: 080407F1001349
Coding: 3D0F034007000002
Shop #: WSC 01392 785 00200
VCID: 2F3B11E63B193DE3FB9-807A
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer Labels: 1K0-920-xxx-25.clb
Part No SW: 1K0 920 853 Q HW: 1K0 920 853 Q
Component: IMMO VDD 1610
Revision: V0003000 Serial number: VWZ7Z0G8112637
Shop #: WSC 00000 000 00000
VCID: 38292ABACE57FA5BAA3-806C
No fault code found.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels:. 1K0-959-701-MIN3.clb
Part No SW: 1K0 959 701 M HW: 1K0 959 701 M
Component: Tuer-SG 005 0987
Coding: 0000180
Shop #: WSC 01392 785 00200
VCID: 38292ABACE57FA5BAA3-806C
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-144-G2V3.clb
Part No: 1K1 909 144 L
Component: EPS_ZFLS Kl.069 H07 1806
Shop #: WSC 00000 028 00001
VCID: 34311E8AD23F1E3B86B-8060
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels:. 1K0-959-433-MIN.clb
Part No: 1K0 959 433 CP
Component: KSG 0401
Coding: 81C802087F2D8405484BC6F010CC
Shop #: WSC 40950 222 21286
VCID: 0059825AD607729B523-8054
Subsystem 1 - Part No: 1K0 951 605 C
Component: LIN BACKUP HORN H03 1301
Subsystem 2 - Part No: 1K0 951 178 A
Component: Neigungssensor 003 0203
Subsystem 3 - Part No: 1K0 951 178 A
Component: Innenraumueberw.003 0203
No fault code found.
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels:. 1K0-959-702-MIN3.clb
Part No SW: 1K0 959 702 M HW: 1K0 959 702 M
Component: Tuer-SG 005 0987
Coding: 0000180
Shop #: WSC 01392 785 00200
VCID: 392F2FBEF55DE35355D-806C
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: 1K0-035-1xx-56.lbl
Part No SW: 1K0 035 186 T HW: 1K0 035 186 T
Component: Radio BVX 034 0046
Revision: 00034000 Serial number: VWZ1Z2G4739028
Coding: 0020200
Shop #: WSC 01392 785 00200
VCID: 372B2986C349F523A39-8062
1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
End----------(Elapsed Time: 01:03, VBatt start/end: 12.6V/12.4V)-----------
Re: 1.9Tdi fuel filter check valve?
My theory on some pressure valve in the filter housing was not correct. The filter house is changed.
I have been able to measure the pressure at the tandem pump now: 5 bar (72 psi) at 1500 rpm. Around 1 bar at idle.
BUT: the only time I can activate the in tank pump is, if I have had the system open (change parts) or the car has been standing for a day or two.
Then I can activate the pump with VCDS and I can start the car - again I run inside and took the SnapOn and tried to measure current on supply wire on in tank pump -> NOTHING!
Now I have to wait couple of days again to be able to activate it with the computer to see that there really is some amps from the pump....
The relay is clicking (I have tested it also) - and I have changed places with the other identical relay. So relay is not the problem.
The tank pump just wont run when the engine is on.
In VCDS, I can see that there is between 12,29-12,44V in the field "Fuel pump status" when the engine is running. Where is that voltage taken/measured from? Battery?
But the pump doesnt produce any current.
Its a brand new pump.
Any ideas?
Re: 1.9Tdi fuel filter check valve?
Pump should be running when relay is energised, so the wiring to the pump and the ground path from the pump needs checking. Perhaps jump the connection at the relay so the pump runs whilst you have a wiggle around.
Re: 1.9Tdi fuel filter check valve?
Quote:
Originally Posted by
Roverfan
Pump should be running when relay is energised, so the wiring to the pump and the ground path from the pump needs checking. Perhaps jump the connection at the relay so the pump runs whilst you have a wiggle around.
I have tried to find the grounding point for the tank pump. Do YOU have an idea where it is located? Elsa does not tell what the different groun points are for - only all the locations.... and in the rear, the pictures are difficult to interpret.
Good idea on jumping the relay! Thanks - Im stuck and appreciate so VERY much your help!!
Re: 1.9Tdi fuel filter check valve?
On your scan above one fault shows :-
1 Fault Found:
00771 - Fuel Level Sensor (G)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 75
Mileage: 263053 km
Time Indication: 0
Date: 2000.00.00
Time: 13:47:05
I'm guessing the fuel level sensor, which will probably be part of the " in-tank pump " mechanism uses the same earth as the pump.
I would guess the earth connection is intermittent.
Re: 1.9Tdi fuel filter check valve?
Thats from me running the car without the electric connector attached to the in tank pump - sorry if I was unclear. There are NO fault codes, what so ever when the car runs out of fuel.
Re: 1.9Tdi fuel filter check valve?
My fault, didn't read your post carefully enough.
Hope you get to the bottom of it.
Re: 1.9Tdi fuel filter check valve?
Have you checked the fuel lines are the correct way around on the pump, it is easy to get it wrong and it will run either way.
Re: 1.9Tdi fuel filter check valve?
Yes they are.
Also correct at the filter.
Re: 1.9Tdi fuel filter check valve?
Quote:
Originally Posted by
Orchid70
I have tried to find the grounding point for the tank pump. Do YOU have an idea where it is located? Elsa does not tell what the different groun points are for - only all the locations.... and in the rear, the pictures are difficult to interpret.
Good idea on jumping the relay! Thanks - Im stuck and appreciate so VERY much your help!!
For the mk6 (which should be similar if not same) the ground location is given as ground connection 2 in right rear side panel, where as the ground for the fuel level sender is 'main wiring harness' so they have different grounds (5 wire fuel pump connector).
Assuming the relay is being energised the first thing to establish is whether it is a wiring problem, and then which wire. It's unlikely that you will have to find the grounding location. I'd expect any problems if any to be at the connector or close to it.
If the fault is present (pump is not running) a simple voltage/continuity test from the fuel pump connector will probably identify the offending wire. Which then can be traced back through the loom