-
A3 Injector Seal Kit
Looking for a bit of advice. I have recently bought a2 07 2.0Tdi Quattro 170, and I think there is an issue with the injector seals. The injectors were done via the recall back in 2007, but there is quite a bit of blow by when the engine is cold.Is there a kit anyone can recommend that includes everything, the seals and bolts, etc for the BMN engine ?Also any advice for doing it ?thanks
-
Re: A3 Injector Seal Kit
what do you mean by blow by ?
-
Re: A3 Injector Seal Kit
The seal on the injector is allowing gases to pass back into the crank etc
-
Re: A3 Injector Seal Kit
so you get some puffing from the oil filler cap ?
-
Re: A3 Injector Seal Kit
Exactly, a lot of pressure and smoke from under the filler cap.
I am looking for a kit with seals and bolts to buy.
-
Re: A3 Injector Seal Kit
-
Re: A3 Injector Seal Kit
its a pd engine i prersume, not common rail ?
-
Re: A3 Injector Seal Kit
-
Re: A3 Injector Seal Kit
then to blow combsution gas into the engine it would need to pass the bottom copper washer and the rubber o rings thats seal the feed and return pipes. i dont think the seals are your problem. http://i222.photobucket.com/albums/d...redamage-2.jpg
-
Re: A3 Injector Seal Kit