Please Help Fault codes after changing clock spring

Fault codes after changing clock spring

The MFSW buttons and horn stopped working and the airbag warning light came on after crunching sound when turning the wheel. It turns out the ribbon cable within the clock spring had broken so I swapped it for a new one from TPS.

After fitting I now get the following warning lights on the dash: Glow Plug light flashing, tyre pressure warning light on constant and traction control light on constant. The traction control and tyre pressure reset buttons no longer work. Cruise control also no longer works.

I have scanned with VCDS and get the following:

Quote:

Monday,17,July,2017,16:17:50:48838VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 17.1.3.0 (x64)
Data version: 20170320 DS267.7
Ross-Tech: Home

VIN: VSSZZZ5PZBRXXXXXX License Plate:
Mileage: 81420km-50592mi Repair Order:

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Chassis Type: 5P (7N0)
Scan: 01 02 03 08 09 15 16 17 19 25 2E 42 44 46 52 56 62 72

VIN: VSSZZZ5PZBRXXXXXX Mileage: 81420km-50592miles

01-Engine -- Status: Malfunction 0010
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: Malfunction 0010
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000

-------------------------------------------------------------------------------
Address 01: Engine (J623-CAYC) Labels: 03L-906-023-CAY.clb
Part No SW: 03L 906 023 AC HW: 03L 906 023 GG
Component: 1,6l R4 CR td H23 6928
Revision: -------- Serial number:
Coding: 00254016032500080000
Shop #: WSC 99999 1023 2097151
ASAM Dataset: EV_ECM16TDI02103L906023AC 003003
ROD: EV_ECM16TDI02103L906023DB.rod
VCID: 67DD54B89ED3127948-8032

2 Faults Found:
6632 - Check Coding of ECUs on Powertrain Data Bus
P1647 00 [229] - -
MIL ON - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 3
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:12

Engine speed: 780.75 /min
Normed load value: 18.0 %
Vehicle speed: 0 km/h
Coolant temperature: 83 °C
Intake air temperature: 33 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 13.892 V
Unlearning counter according OBD: 40
Coding in the engine control module-FRF_VARCOD: 1
Number of resets of main unit-CTR_RST_MC: 0
ACC target acceleration-AC_SP_CRU_EXT: -0.0000 m/s²
Acceleration-AC_VEH_CLC: -0.0000 m/s²
Status of ACC/CCS acceleration interface-STATE_CRU_AC: 0
Cruise Control System (CCS): status-Binary 8 Bit: 00000011

6116 - Function Restriction due to Faults in Other Modules
U1113 00 [047] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 3
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:10

Engine speed: 781.00 /min
Normed load value: 17.6 %
Vehicle speed: 0 km/h
Coolant temperature: 83 °C
Intake air temperature: 33 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 13.892 V
Unlearning counter according OBD: 40
Accelerator position: normalized-Accelerator position: 0.00 %
Cruise Control System (CCS): switch position-STATE_CRU_SWI_POS: 00000010

Readiness: 0100 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 0AM-927-769.clb
Part No SW: 0AM 300 049 K HW: 0AM 927 769 D
Component: GSG DSG AG7 403 2101
Revision: 00040034 Serial number: 00001011075567
Coding: 0000020
Shop #: WSC 06402 785 00200
VCID: 3979C2C070E75489EE-806C

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BE HW: 1K0 907 379 BE
Component: ESP MK60EC1 H31 0108
Revision: 00H31001
Coding: 233F4012092400FBC41002E8901F0081350000
Shop #: WSC 04941 000 00000
VCID: 76E309FCC179FBF1C3-8022

2 Faults Found:
00778 - Steering Angle Sensor (G85)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 161
Mileage: 81427 km
Time Indication: 0
Date: 2011.12.08
Time: 00:21:17

Freeze Frame:
Count: 2
Count: 14
Count: 29184
Count: 166
Count: 44544
Count: 0
Count: 1544
Count: 0

00778 - Steering Angle Sensor (G85)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 161
Mileage: 81427 km
Time Indication: 0
Date: 2011.12.08
Time: 00:21:17

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 5K0-907-044.clb
Part No SW: 5P0 907 044 P HW: 5P0 907 044 P
Component: Climatronic H15 0702
Revision: 00001001
Coding: 0000000002
Shop #: WSC 99999 1023 2097151
ASAM Dataset: EV_Climatronic A01006
ROD: EV_ClimaAutoBasis_SE35.rod
VCID: 3D71D6D0ACCF68A9C2-8068

1 Fault Found:
9481200 - Refrigerant Pressure
B10AB F0 [009] - Too Low
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 121
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:09

-------------------------------------------------------------------------------
Address 09: Cent. Elect.
Cannot be reached
Unable to communicate with address 09. Are you sure the doors are unlocked?

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 1K0-909-605.lbl
Part No SW: 1K0 909 605 T HW: 1K0 909 605 T
Component: S9 AIRBAG VW8 020 2300
Revision: 05020000 Serial number: 0038PD2NWVRZ
Coding: 0021305
Shop #: WSC 06402 785 00200
VCID: 3D71D6D064CF68A9C2-8068

Subsystem 1 - Serial number: 6332MSME5874006DE

Subsystem 2 - Serial number: 6342MSME58734B1CN

Subsystem 3 - Serial number: 6351HSME247C26729

Subsystem 4 - Serial number: 6361HSME247E03334

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels: 5K0-953-569.clb
Part No SW: 5K0 953 569 AL HW: 5K0 953 569 AL
Component: LENKS.MODUL 016 0180
Revision: --X01--- Serial number: 20170531200057
Coding: 7982A00000
Shop #: WSC 01286 386 08256
ASAM Dataset: EV_VW360SteerWheelUDS A03004
ROD: EV_VW360SteerWheelUDS.rod
VCID: 020B652C95B1D751FF-8056

Multifunction steering wheel control module:
Subsystem 1 - Part No SW: 1P0 959 538 C HW: 1P0 959 538 C Labels: 3C8-959-537.CLB
Component: E221__MFL-TAP H02 0102
Serial number: 00000000000000190247
Coding: E20000

5 Faults Found:
227355 - Windshield Wiper/Washer Switch
B1149 13 [009] - Open Circuit
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 121
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:09

229127 - Cruise Control Switch
B1154 11 [009] - Short to Ground
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 121
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:09

229147 - Cruise Control Switch
B1154 13 [009] - Open Circuit
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 121
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:09

335876 - Powertrain Databus
U0002 00 [009] - No Communications
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 121
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:09

1140738 - Steering angle sensor
B1168 54 [009] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 121
Mileage: 81428 km
Date: 2017.07.17
Time: 00:29:09

UBat: 14.00 V
MC1 interner Fehlercode: 0
MC2 interner Fehlercode: 0

-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 1P0 920 910 N HW: 1P0 920 910 N
Component: KOMBI H06 0404
Serial number: 00000000000000
Coding: 410A00
Shop #: WSC 99999 1023 2097151
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
ROD: EV_Kombi_UDS_VDD_RM09_SK46.rod
VCID: 3467F3F49F85A9E13D-8060

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 C HW: 1K0 907 951
Component: J533 Gateway H37 0614
Revision: H37 Serial number: 311010F2001875
Coding: 358203
Shop #: WSC 04941 000 00000
VCID: 306FFFE4639D95C159-8064

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H06 0404
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
VCID: 6ADB2D8C8DC12F1157-803E

No fault code found.

-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650) Labels: 5N0-035-342.lbl
Part No SW: 6J0 035 342 C HW: 6J0 035 342 C
Component: SG EXT.PLAYER H13 0111
Revision: A1001003 Serial number: 7668889373
Coding: 020000
Shop #: WSC 04941 000 00000
VCID: 244703B427653961AD-8070

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels: 3C0-959-70X-GEN4.clb
Part No SW: 1T0 959 701 AG HW: 3C0 959 793 A
Component: TUER-SG FT 002 0310
Revision: 12101005 Serial number: 0000818965
Coding: 0012B0
Shop #: WSC 99999 1023 2097151
ASAM Dataset: EV_DCU42BroseDriveSide A03004
ROD: EV_DCU42BroseDriveSide.rod
VCID: 7CF71BD4F755A1A1B5-8028

Slave Driver:
Subsystem 1 - Part No SW: 1K0 959 704 AE HW: 1K0 959 794 R
Component: J389__TSG-HR 006 1401
Serial number: 00000005347339
Coding: 000290

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1K0-909-14x-GEN3.clb
Part No: 1K0 909 144 J
Component: EPS_ZFLS Kl. 65 3001
Revision: 00H17000
Shop #: WSC 06402 785 00200
VCID: 3169FAE0A8979CC956-8064

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.
Cannot be reached

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387) Labels: 3C0-959-70X-GEN4.clb
Part No SW: 1T0 959 702 AC HW: 3C0 959 792 A
Component: TUER-SG BT 002 0310
Revision: 14101005 Serial number: 0001062917
Coding: 0012B0
Shop #: WSC 99999 1023 2097151
ASAM Dataset: EV_DCU52BrosePasseSide A03004
ROD: EV_DCU52BrosePasseSide.rod
VCID: 79F902C0F8679489AE-802C

Slave Passenger:
Subsystem 1 - Part No SW: 1K0 959 703 AE HW: 1K0 959 795 R
Component: J388__TSG-HL 006 1401
Serial number: 00000005343077
Coding: 000290

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: 5M0-035-1xx-56.clb
Part No SW: 5P0 035 186 HW: 5P0 035 186
Component: Media2.0 H01 0007
Revision: 01000001 Serial number: SEZ1Z3K3988209
Coding: 0002040004
Shop #: WSC 04941 000 00000
VCID: 6CD72B948F35312125-8038

No fault code found.

End-------------------------(Elapsed Time: 02:22)--------------------------

Any ideas because I am now stumped.

Many thanks

Jon

Re: Fault codes after changing clock spring

Ok, so I'm a bit closer. The coding in then new clock spring was wrong. I have recoded to the same as the new module and am now only getting fault codes relating to the steering angle sensor not being calibrated/initiated.

Anyone know how to calibrate/initiate the steering angle sensor?

Re: Fault codes after changing clock spring

The calibration function is in the basic setting menu.

Re: Fault codes after changing clock spring

Quote:

Originally Posted by Crasher

The calibration function is in the basic setting menu.

Thanks Crasher. I tried that but get the message "Error: value not in range". When I check the steering angle with the wheels straight ahead is reads between -0.5 and +0.45 so I cannot see how the value is out of range.

Re: Fault codes after changing clock spring

Use security access 16 and enter 40168 and then go back into basic settings 060. Try it in Coding II, if that does not work.