Re: T4 2.5TDI ACV 5 cylinder
The slot in the camshaft on the injection pump end should be parallel with the top of the cylinder head so the setting tool extends over the cylinder head.
Re: T4 2.5TDI ACV 5 cylinder
Quote:
Originally Posted by
carbon
The slot in the camshaft on the injection pump end should be parallel with the top of the cylinder head so the setting tool extends over the cylinder head.
Yeah i am with you on that but is there not 2 possibilities if I was to turn the camshaft 360%?? there must be up and an upside down......thanks for you prompt reply
Re: T4 2.5TDI ACV 5 cylinder
Hi When installing the camshaft No. 1 cylinder cams must point upwards
Re: T4 2.5TDI ACV 5 cylinder
The slot is not central on the end, its offset so the setting tool will only fit over the cylinder head in the correct postion i.e the slot above the top edge of the cylinder head. Also as 'kenney' has pointed out no.1 cyl cams upwards.
Re: T4 2.5TDI ACV 5 cylinder
Yes Yes!!! just small things like that can make life easier...Thanks
:beerchug:
Re: T4 2.5TDI ACV 5 cylinder
Yeah back again. I´v now tightened down the head and now setting up the timing belts starting with the diesel pump. Found the markings the one thing I can´t seem to find in the manuel is where the marking on the camshaft pulley/wheel to diesel pump should align with i´m guessing it lines up with the edge of the cylinder head. Maybe someone knows where i can see a diagram on better again a photo of the timing marks for the crankshaft camshaft and the diesel pump camshaft. The engine is an ACV 2.5TDI 5 cylinder would be a 2001 model although first registered in November 2000. i can see by the diesel pump. it is a little different from the 2000 model.
I have been checking the posts here on the forum but no luck yet.
thanks..Denis
Re: T4 2.5TDI ACV 5 cylinder
Hi Send your e-mail address and i will send you all the info you need
Re: T4 2.5TDI ACV 5 cylinder
Hi Kenny thanks a lot my email is denis@bog.dk .......kind regards
Re: T4 2.5TDI ACV 5 cylinder
I have just changed the belts on my 1998 T4 2.5TDi ACV engine.
I found a complete lack of information on the web before I started the job so when I finished the procedure I wrote it up here:
http://www.howtomendit.com/answers.php?id=127761
I also have gathered some additional info if anyone wants it. Send me a message if you are interested.