PDA

View Full Version : help please?



philglasgow
23-05-2007, 03:01 PM
hi folks can anyone tell me how to get access to my front ashtray to change it for a wood 1, I can see no screws or clips , have looked under gaiter, its a 1997 r tdi s, any ideas would we welcome


Phil

minty0_10
23-05-2007, 06:05 PM
big hammer....................:D

philglasgow
24-05-2007, 11:33 AM
most helpful

Mach110
24-05-2007, 12:43 PM
Hi there mate do you mean the wood effect trim that you stick on?.

If so you have to remove the centre console there are 2 screws at each side of the console covered by plastic tabs get a flat head screw driver and pop the tabs out.

Then remove the rear ashtry and theres 3 13m nuts remove them then pull the gear gaitor off and unscrew the gear knob and then remove the console.

This is how i did mines.
HTH.

philglasgow
24-05-2007, 08:14 PM
no its the genuine 1 from vw of an se i think , i cannot see any screws or caps whatsoever on the centre console , can you tell me eactly were to look if you can please?


thanks


Phil

philglasgow
25-05-2007, 08:49 PM
Ive sussed it I took of Mr Magoos specs and then i saw the location holes.



Thanks


Guys