PDA

View Full Version : B5 Radio Code and waterworks and remote boot switch



spitss1
17-05-2007, 05:08 PM
Hi all, been reading the forum for a while, I too have suffered the dreaded water in the footwell syndrome. Net result is the CCM was ruined and the wires to the connectors were very corroded. I sourced a new CCM, got the soldering Iron out and repaired as best as pos the connectors by using new strips of wire into the pins and connectors onto the old wire, and have managed to get everything electrical working again apart from the remote boot switch, seems no power gets there at all... Does anyone know which pin this is on the CCM so that I can check my wiring? Also I am in the process of following the guide at :http://www.weirdlittlebiscuit.com/passat/leak/ but was a bit worried about removing the battery as I dont have a code or manual. Is a code required on a 51 plate B5?
All help gratefully appreciated
Spit.

spitss1
21-05-2007, 12:49 PM
Hey all, can anyone help with this query??
Thanks