A4 Sill Cover Removal

[Audity]

Hi,

Hopefully doing this job shortly.
Just looking for any pointers as to what to expect.
Are they bolted only, bolts and clips, clips only, adhesive or something else ?
Just like to be forewarned especially if there is a correct procedure.

[Audity]

Nobody ?
Not a soul ?
Mmmmm.:dunno:

[Turbokiisseli]

If you mean swapping your door sill covers for the S-Line ones, then the old ones are held on by double sided tape and small tabs in the center. Run a sharp hobby knife along the edge of the cover about 2cm in and they should come off nicely with the tabs intact.

[Audity]

If you mean swapping your door sill covers for the S-Line ones, then the old ones are held on by double sided tape and small tabs in the center. Run a sharp hobby knife along the edge of the cover about 2cm in and they should come off nicely with the tabs intact.

Hi,
Many thanks for the input.
Not sure if I`m talking about the same ones you are.
Its the plastic covers on the actual body which run from the bottom of the front wing to the bottom of the rear wheel arch covering the sills.
Are these the ones you mean?