PDA

View Full Version : iphone kit where does it go ?



trapster
11-02-2010, 12:47 AM
guys

i have the centre arm rest fitted to my A4

i have seen a audi i phone kit on ebay and it shows it fitted into the centre arm rest ?

is this correct ?

would rather have this than have a phone holder screwed to the side of the centre console?
will the below work i have audi sat nav plus and 6 cd changer in glove box ?

http://cgi.ebay.co.uk/Audi-Mobile-Phone-Cradle-Apple-iPhone_W0QQitemZ320457957563QQcmdZViewItemQQptZUK_ MobilePhones_MobilePhoneAccessories_MobilePhoneBat teries?hash=item4a9cc860bb

sooty
11-02-2010, 05:55 AM
guys

i have the centre arm rest fitted to my A4

i have seen a audi i phone kit on ebay and it shows it fitted into the centre arm rest ?

is this correct ?

would rather have this than have a phone holder screwed to the side of the centre console?
will the below work i have audi sat nav plus and 6 cd changer in glove box ?

http://cgi.ebay.co.uk/Audi-Mobile-Phone-Cradle-Apple-iPhone_W0QQitemZ320457957563QQcmdZViewItemQQptZUK_ MobilePhones_MobilePhoneAccessories_MobilePhoneBat teries?hash=item4a9cc860bb

Hi
This is a cradle for the iPhone. You can only use it if you have the Audi Bluetooth Phone Prep installed in the car.
If you look in the arm rest do you see a black rectangle block?
This holder / adaptor fits onto this prep kit.


Hope this helps.

http://www.stokeaudi-parts.co.uk/product_images/uploaded_images/gen_3_phone_prep.JPG

trapster
11-02-2010, 08:36 PM
ok i will take a look

but i dont think there are any connections in the arm rest just a red light which is part of the light pack i think.
there is a plastic cover at the back of the arm rest could it be under there i wonder i will look

sooty
11-02-2010, 09:10 PM
there is a plastic cover at the back of the arm rest could it be under there i wonder i will look

Hi I don't think it will be there.
It will be inside the arm rest itself

spo666
06-08-2010, 03:09 PM
I have taken my nokia adapter off the cradle, but can't get it back on and don't want to damage the little plastic lugs.
Any ideas?