View Full Version : A4 - B6 -offset & Stud Diameter - Addtional question added
RickT
04-05-2007, 05:55 PM
This has been asked a few time before but i need to confirm!!
What are the following details for the A4 - B6.
Offset =
Stud Diameter. =
#################
Also... if you can answer the above question... i let let you answer this one!! what other wheels in the VAG range use the same studd patten and offset as the A4 - B6 ..
For some reson the figures 35mm & 112 stick in my head????
(One thing to add..... If you are not 100% sure on the answer PLEASE do not agree with anyone or post.. im sure you can understand why..)
YOUR THOUGHTS PLEASE!!
RickT
A4 B5 is 5 x 112 with an ET of 35 to 42
A4 B6 is 5 x 112 with an ET of 35 to 45.
Others that share the same PCD and centre bore (57.1)
Audi;
100 / 200
New A3
A4
A6
A8
Allroad
S4
S6
Ford;
Galaxy
SEAT;
Alhambra
Superb
Volkswagen;
Golf V
Passat
Phaeton
Sharan
Touran
Transporter
There are various Merc wheels that fit too, but their centre bore is higher (66ish)
Obviously the offsets vary too.
RickT
04-05-2007, 11:35 PM
Cheers Sam.
RicKT
RickT
05-05-2007, 11:42 PM
Hi.. can you confirm.... Do the wheels off a 2004 A3 fit the B6??
Condition (http://pages.ebay.co.uk/help/attrhelp/contextual/1.html): Used
Rim InformationTyre InformationMetal Type: Aluminium
Tyre Type: All-Weather
Rim Width: 7.5J
Tyre Width: 225
Rim Diameter: 17 inches
Aspect Ratio: 45
Offset: --
Load Index: 90
Number of Studs: 5
Speed Rating: W: max 168 mph
Stud Diameter: 112
Tyre Manufacturer: Pirelli
Rim Manufacturer: Ronal
Rim Structure: One Piece
Manufacturer Part Number: --
RickT
06-05-2007, 01:12 PM
any advice??
RicKT
RickT
06-05-2007, 04:26 PM
So the offset on the A4 is ET45 i have read...??
Also i have read its ET35mm??
What does it mean of ET35 to ET45 ??
The question is still is.. will wheels from a A3 2004 fit??
Do you know what the offset is on the A3?
RicKT
RickT
06-05-2007, 04:36 PM
found the ET is 56...
so these wont fit..
RicKT
Wow, nice little conversation you had there Rick!
They will fit, but you'll need spacers.
http://www.1010tires.com/WheelOffsetCalculator.asp
Use the above tool to work out what will and wont work.
indian jalepeno
01-06-2007, 07:13 PM
found the ET is 56...
so these wont fit..
RicKT
Hi, just a follow up to the above, as needing a 19" RS6 alloy, I have seen one but the seller says its an ET 30? This is deffo for an Audi so will it fit mine (B6 A4) or (simple maths here)- will I need a 5mm spacer?? This would be used as my spare BTW.
Thanks
I J
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.