remove originals door sills

[sline002]

hi every one just baught anew s-line door sills and need some help reguarding how to remove the originals one any help is welcome

[sline002]

any one please

[bez101]

any one please
use a hotair gun heat em up and pull em off there only stuck on clean up and refit with strong doulbe sided sticky i did it that way

[A6TYY]

use a hotair gun heat em up and pull em off there only stuck on clean up and refit with strong doulbe sided sticky i did it that way

when i looked at the bottom of my door there was two screws either side, so you saying that the 2 screws and glue all thats holding it ?

[bez101]

what have u got doorsill covers or s-line flares bottom outside of the door if its the door flares its just the 2 screws and they come off

[A6TYY]

its not s line flares (i thort they were called blades) the cars silver but the bottom parts greyish if u know what i mean.

[bez101]

its not s line flares (i thort they were called blades) the cars silver but the bottom parts greyish if u know what i mean.
flares blades same thing yes screw at each end and they remove 2 min job

[A6TYY]

will it still have glue on it though fella ? or not

[sline002]

tanks for replay i will do it

[Turbokiisseli]

To remove the door blades you need to remove the screws at each end on the inside of the door and pull the blade toward the rear to release it from the clips. No glue needed.