alarm fault codes

[A6TYY]

hi last week i adjusted the codes on my a4 b6 coz i wanted to hear the beep when i locked the car, i tried a few other things too like auto locking the doors when the car drives off etc. just ran vag com on the car and its thrown up some fault codes.

these were my fault codes before i adjusted anything.

Address 45 -------------------------------------------------------
Controller: 8E0 951 177
Component: Innenraumueberw. 0503
Coding: 00001
Shop #: WSC 00000
No fault code found.

Address 46 -------------------------------------------------------
Controller: 8E0 959 433 AJ
Component: Komfortgerát T9F 0619
Coding: 06859
Shop #: WSC 00613
2 Faults Found:
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01331 - Door Control Module: Driver Side (J386)
53-10 - Supply Voltage Too Low - Intermittent
i was cool with these because i knew when i ran vag com i had the door open window open etc so it would flag up a few codes but since i adjusted module 46 Comfort System
i have these fault codes
Address 45 -------------------------------------------------------
Controller: 8E0 951 177
Component: Innenraumueberw. 0503
Coding: 00001
Shop #: WSC 00000
1 Fault Found:
01463 - Alarm triggered by Sensor for anti-theft alarm System
43-00 - Closed
Address 46 -------------------------------------------------------
Controller: 8E0 959 433 AJ
Component: Komfortgerát T9F 0619
Coding: 07403
Shop #: WSC 00613
4 Faults Found:
01616 - Signal Wire to Interior Monitor
49-10 - No Communications - Intermittent
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01403 - Glass-Break Sensors: Rear
36-10 - Open Circuit - Intermittent
01331 - Door Control Module: Driver Side (J386)
53-00 - Supply Voltage Too Low
if any one could help me id be greatful thank you

[kenney]

First i would say there is a bad connection to the drivers side, door modul,and can you explain how you arrived at the code 07403,which functions you coded for

[A6TYY]

i have no idea kenney
i just clicked on auto scan and that all comes up. its all sorted now i cleared the codes and they never came back. so i guess thats all that it needed. turned the alarm on left it for a while came back and rechecked the scan and still no faults, i just left the usb cable in the door and shut it so now i get no fault codes what so ever, well except the radio ue to installing an after market one. thank you ne wayz kenney