9N3 Polo - Activating Auto locking / Cruise

[daveb99]

I've just bought a Polo 1.6 Sport (5 door) for my wife, 56 plate with just 12,000 miles, looking forward to picking it up in 10 days time.

We've had a few VW / Audis and I have a fully registered VAG-COM lead (HEX & CAN).

Does anyone know whether you can configure the Polo's control modules so that the doors will lock automatically as you set off (usually at about 5mph) ?

Also, it has the multifunction computer fitted (same as the Polo GTI). Will I be able to simply buy the correct wiper & cruise column stalk, fit it, and enable cruise control using my VAG-COM as well?

Any help would be much appreciated...

[CDPDesign]

As far as I know you can. I did this on my Mk5 Golf using VAG-COM. If you are in my area I can have a go for you..

[shark_90]

You will need to change the coding in the Central Convenience module (46) for the door locking.

Cruise control is enabled in the Engine module (01) and in the Steering Wheel module (16) by adding the correct stalk you should be OK to just enable it with no other changes.