PDA

View Full Version : just scanned the passat?



hongkongstuey
25-06-2009, 08:34 PM
been a while since i scanned the car, came up with these, any ideas? looks normal to me as it hasnt got fault reported on any of them

Address 01: Engine
Protocol: KW1281
Controller: 038 906 018 P
Component: 1,9l R4 EDC 40SG 1623
Coding: 00002
Shop #: WSC 00028

Address 03: ABS Brakes
Protocol: KW1281
Controller: 8E0 614 111 AB
Component: ABS 5.3 FRONT D00
Coding: 0273004281
Shop #: BB 24548

Address 08: Auto HVAC
Protocol: KW1281
Controller: 3B2 907 044 B
Component: CLIMATRONIC V 1.0.0
Coding: 02000
Shop #: WSC 00028

Skipping Address 15-Airbags

Address 17: Instruments
Protocol: KW1281
Controller: 3B1 919 930 C
Component: B5-KOMBIINSTR. VDO V01
Coding: 04440
Shop #: WSC 00000

Address 25: Immobilizer
Protocol: KW1281
Controller: Bit teA dre ssv
Component: e 17 eingeben

hongkongstuey
27-06-2009, 02:26 PM
anyone?

onzarob
28-06-2009, 07:51 PM
anyone?

Thats fine mate, its just listing the controllers. ;) no fault codes :D

bearthebruce
01-07-2009, 02:52 PM
As onzarob said, all you have listed are the control modules. No faults are reported. Run an Autoscan or go into each module listed above and scan for fault codes.

hongkongstuey
03-07-2009, 11:20 AM
just happens ive got a problem with car now, air con control unit has stopped working, signal to start fan has broken, 12 volts to fan and compressor works and you get cold air, take 12 volts away and fan stops obviously but then so does cold air, have posted in passat section anyway and hope it is an easy fix and not a compressor i have to buy

martin1810
03-07-2009, 07:52 PM
When you put 12v to the fan are you bypassing the pressure switch. If the pressure switch is faulty it won't let the fan and compressor run.