Need to repair paint on wiper arm.

[krupatel]

A large chunk of paint has come away from the wiper arm's head (forgive me if this is the wrong terminology) exposing the bear metal.

Should I just rub down and make good with black hammerite or are they any better solutions?

Thanks in advance.

[Zeb]

A large chunk of paint has come away from the wiper arm's head (forgive me if this is the wrong terminology) exposing the bear metal.

Should I just rub down and make good with black hammerite or are they any better solutions?

Thanks in advance.

I had the same problem with my wiper arms, you can see the primer looked awful, so I painted with Hammerite and now its gone :)

[RickT]

Best bet instead of hammerite as i thought it looked messy when i did it..

Then i did the below.

Remove both wipers arms,

Prep with circular wire bush and wet and dry..

Then spray paint with black car paint, and lacquer

Rick

[paul20v]

I took mine off too rubbed them down primed them and sprayed them in satin black that was more oem looking for me .