PDA

View Full Version : Help Need with fault



smudger_rubble
28-05-2009, 09:02 PM
Hi all,

I have had trouble with a electric front window, to cut a very long story short , i have found the problem, it was a wire which was cut in two in the rubber between the door and body of the car.

So without thinking i disconected the wire loom and replaced the cut wire. Then proceeded to refit everything, this was fine untill i turned the ignion on.

There is a beep and a fault saying, AIR BAG FAULT wot do i need to do now????

Oh by the way the window works fine now..... lmao.

Thanks Jason

euroslap
28-05-2009, 09:06 PM
Hi all,

I have had trouble with a electric front window, to cut a very long story short , i have found the problem, it was a wire which was cut in two in the rubber between the door and body of the car.

So without thinking i disconected the wire loom and replaced the cut wire. Then proceeded to refit everything, this was fine untill i turned the ignion on.

There is a beep and a fault saying, AIR BAG FAULT wot do i need to do now????

Oh by the way the window works fine now..... lmao.

Thanks Jason

You'll need to either go to a dealership or find somebody local with a full version of VAGCOM to turn the light off. ;)

smudger_rubble
28-05-2009, 09:08 PM
You'll need to either go to a dealership or find somebody local with a full version of VAGCOM to turn the light off. ;)

Does anyone near to me have VAGCOM????

I live in Bodmin Cornwall...........

Ben
28-05-2009, 09:41 PM
wait till onzarob reads this thread.;)