View Full Version : Question How to put an A3 on axle stands
Red Ed
22-05-2009, 04:42 PM
Hi all,
Where do I put axle stands on a A3 1.9TDi (2000). I probably won't know the technical terms so please explain using small words! A photo would be great. Sorry to ask a dumb question but I haven't done this before.
Red Ed
28-06-2012, 01:06 PM
3 years after posting the above message I find myself looking for the same information again!
Hopefully by posting these images I will help others. Please would you confirm that the pictures show the correct / acceptable location for axle stands and trolley jack on an Audi A3.
Prior to installing the trolley jack I removed a plastic plug from the hole into which the jack fits.
If someone could post similar pic for the front that would be great.
1716817169
Zenerdiode
19-07-2012, 09:04 PM
Look for a dimple about the size of a 5p piece on the sill; that is the jacking point. The tool jack face is shaped to go around the crimp of the sill - I wouldn't jack elsewhere as the sill is re-inforced at the jacking point but may not be elsewhere.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.