BobProperty
15-05-2009, 03:53 PM
1.6 AEE so Marelli electrics.
Cleaned throttle body on car as it was filthy and idle was high, especially when cold. Plugged in the VAGCOM and do following:
(as nicked from Ross-Tech wiki)
Turn the key on but do not start the car.
[Select]
[01 - Engine]
[Measuring Blocks - 08]
Enter Group 098 (Note: Some SIMOS or Marelli ECU's use Group 001 such as ADY & AEE engines)
[Go!]
[Switch to basic settings]
First, neither 001 nor 098 have "ADP" in them unlike our AEX. Second, and more importantly, the "Switch to basic settings" remains "greyed out" so you can't click on it. So is 001 or 098 the wrong group? Is there an alternative group on AEEs because I've paged through the groups and couldn't see anything like ADP?
Explanation anyone? I'm thinking the throttle body is duff as it seems to keep setting itself and doesn't stop a few minutes after the ignition is on.
Cleaned throttle body on car as it was filthy and idle was high, especially when cold. Plugged in the VAGCOM and do following:
(as nicked from Ross-Tech wiki)
Turn the key on but do not start the car.
[Select]
[01 - Engine]
[Measuring Blocks - 08]
Enter Group 098 (Note: Some SIMOS or Marelli ECU's use Group 001 such as ADY & AEE engines)
[Go!]
[Switch to basic settings]
First, neither 001 nor 098 have "ADP" in them unlike our AEX. Second, and more importantly, the "Switch to basic settings" remains "greyed out" so you can't click on it. So is 001 or 098 the wrong group? Is there an alternative group on AEEs because I've paged through the groups and couldn't see anything like ADP?
Explanation anyone? I'm thinking the throttle body is duff as it seems to keep setting itself and doesn't stop a few minutes after the ignition is on.