Replacing standard front centre dash vents stereo trim surround for genuine aluminium trim

[shaft-50]

The mod bug's back again so here's my latest project.

Have decided to change the standard black centre dash/stereo surround trim on my Golf MK5 for the aluminium look version.

Used the following guide by "golfmk5gttdi". "How To" Remove / Install an RCD 300, RCD 500, MFD2 RCD 510 or RNS 510 in a MK5 Golf. Superb guide with step-by-step instructions with pics which is spot on and perfect for the pro's and newbies like me :D cheers mate.

Ordered the parts through local VW as the German ebay sellers and like were asking big bucks for it. Got it for a fraction of their rip off prices.

Have managed to add the upper vent/trim, after removing them both but awaiting for the lower one which is on back order from Germany so hopefully will arrive by end of the week.

Just some advice for those out there who take theres out, the hazard light and passenger airbag switches wires do not need to be disconnect (apparently if you do this you may get an airbag fault warning light requiring vagcom !), the two swtiches can be gently push out backwards out of the vent as a whole and pushed back into the new/replacement one.

I have added pics of it so far ... First two pics are of what the stock ones looked like once off.

As per usual, let me know what you think but please be gentle :approve:

Thanks

PS the last pic shows the standard trim missing and is awaiting the alu look one to be fitted.


http://i569.photobucket.com/albums/ss137/shaft-50/UPPERVENT1.jpg

http://i569.photobucket.com/albums/ss137/shaft-50/LOWERVENT1.jpg

http://i569.photobucket.com/albums/ss137/shaft-50/newvent3.jpg

http://i569.photobucket.com/albums/ss137/shaft-50/newvent4.jpg

[Ben]

i also want to do this. Not just because you have. I've wanted to for ages.

how much were the parts?

[shaft-50]

Its nice to know i've done something to please the boys and girls on here :D

The parts cost me around £75.00 from my local VW dealer which included a discount I am lucky to get.

Hope this helps.

PS if you need the part numbers let know, ta

[mjom89]

sorry to go off of the subject, but is that the RNS 510 head unit?

[shaft-50]

Hi, yes it is the RNS510 head unit. It is Version B with V3 maps model. :D

[Jimp45]

I did mine a few months ago. Here's a picture:
http://i59.photobucket.com/albums/g309/jimmycake/Car/interiordaytime.jpg

[shaft-50]

Looks good mate :beerchug:

Shame you didnt do the bit around the ashtray cover too ;)

Anyways, just out of interest, how much did you pay for your dash trims ?

[shaft-50]

Well the remaining part landed today so I have completed the swap :D

http://i569.photobucket.com/albums/ss137/shaft-50/newtrim1.jpg

http://i569.photobucket.com/albums/ss137/shaft-50/newtrim2.jpg

[elvismiggell]

Looks good.

How did you get hold of an RNS510 and do you mind if I ask how much it set you back?

[shaft-50]

Off topic but anyways, the RNS510 which I think is the daddy of all genuine vw headunits was bought off ebay as when I ordered my car vw were asking £2500 for it. It cost me £900.00 and that was for the B version. Easy to fit yourself and is only a 5-10 min job. A superb unit all round ;)

[gogzyb]

Hi there,

Do you have a note of the part numbers handy at all?

Looks great!

Thanks,
G

[RickT]

Looks great..

I was thinking of doing this also, If you can post up the part numbers that would be great...

Also.. any one know have much the dash trims, and door trims are in Silver?

Rick

[shaft-50]

Guys, sorry but dont have the part numbers to hand and cant find the bloody reciept either.

They are a common part so the VW parts should not have any difficulty in finding them. They come in two parts, the ashtray lid cover and the surround (roughly cost around £90 for the pair).

Sorry couldnt be of anymore help.

[iamwk]

need to replace my centre panel too but i can't seem to find the how-to online...

any chance of anyone emailing me the guide?

would be greatly appreciated!

cheers,
iamwk


The mod bug's back again so here's my latest project.

Have decided to change the standard black centre dash/stereo surround trim on my Golf MK5 for the aluminium look version.

Used the following guide by "golfmk5gttdi". "How To" Remove / Install an RCD 300, RCD 500, MFD2 RCD 510 or RNS 510 in a MK5 Golf. Superb guide with step-by-step instructions with pics which is spot on and perfect for the pro's and newbies like me :D cheers mate.

Ordered the parts through local VW as the German ebay sellers and like were asking big bucks for it. Got it for a fraction of their rip off prices.

Have managed to add the upper vent/trim, after removing them both but awaiting for the lower one which is on back order from Germany so hopefully will arrive by end of the week.

Just some advice for those out there who take theres out, the hazard light and passenger airbag switches wires do not need to be disconnect (apparently if you do this you may get an airbag fault warning light requiring vagcom !), the two swtiches can be gently push out backwards out of the vent as a whole and pushed back into the new/replacement one.

I have added pics of it so far ... First two pics are of what the stock ones looked like once off.

As per usual, let me know what you think but please be gentle :approve:

Thanks

PS the last pic shows the standard trim missing and is awaiting the alu look one to be fitted.


http://i569.photobucket.com/albums/ss137/shaft-50/UPPERVENT1.jpg

http://i569.photobucket.com/albums/ss137/shaft-50/LOWERVENT1.jpg

http://i569.photobucket.com/albums/ss137/shaft-50/newvent3.jpg

http://i569.photobucket.com/albums/ss137/shaft-50/newvent4.jpg

[shaft-50]

Hi, hope this works and helps. Its under the how to section and shows how to fit the rns510 head unit.


http://www.vwaudiforum.co.uk/forum/showthread.php?t=21273&highlight=golf+mk5+rns510