wrong door display

[QuattroMAXX]

i hope somebody can point me in the right direction.
i recenlty followed a guide that does the following
unlock all doors via remote with one press
use the remote to open and close windows

this works ok but i have noticed when i open the passenger door the dis shows the driver door open and vise versa.
also the when i remote lock the doors i get a beep which i dont want.

can any of you chaps give me instructions how to sort these minor problems out.

2005 A4 B7 2.0 TFSI S-Line quattro

[a8 tech]

list your log file for all changes to the convience code so we can give you the correct code as you have changed the country and added lock with siren beep

[QuattroMAXX]

im a complete novice at this, how do i get the log file?

[a8 tech]

When ever you scan the fault memory or erase and change codes you have the option of saving the data,this is called a log and if you open the ross tech folder in your C drive you can see the log files.Create a shortcut for the log files so they are accessible and you can upload the file to forum or print them out .
If you never saved your work then goto address 46 and save a copy of your recent changes and post the file on this thread so i can see what you have changed

[QuattroMAXX]

i did not save the log or the old value, yes i know stupid

the vaule in 46 is 11896, this was suposed to do one click locks and remote windows

[a8 tech]

reset to 06895 and try that as you have caused yourself a bit of a problem,list the variant of your vehicle saloon or avant

+00001 = GB-Alarm (not USA)
* +00002 = Confirmation Anti-Theft Warning System (Blink)
* +00004 = Selective Central Locking (SCL)
* +00008 = Anti-Theft Warning System
* +00016 = Rear Lid Release Locking at 5 km/h
* +00032 = Central Locking at 15 km/h (or 10 mph)
* +00064 = Comfort Function via Remote Control (not USA)
* +00128 = Right Hand Drive (RHD)
* +00256 = Avant
* +00512 = Confirmation Close via Remote (1x Blink)
* +01024 = Confirmation Anti-Theft Warning Sytem Horn Activation
* +02048 = Door-/Window Regulator Logic
* +04096 = Thatcham Anti-Theft Warning (not USA)
* +08192 = No Safe-Function
* +16384 = Side Windows with Insulated Glass

Note: Coding is the sum of the individual options. Not all options apply for all control moduls!

[QuattroMAXX]

so would i have to add up what i want to set up and if i get it wrong will i damage any thing

[a8 tech]

no you will be fine but start with entering 06895 and try out the functions,there should be a balloon pop up on vcds when coding to help you

[QuattroMAXX]

i think i get it, i will try this later
thanks for your help!! :biggthump

[KingDan]

list your log file for all changes to the convience code so we can give you the correct code as you have changed the country and added lock with siren beep

Hi, I also have the same problem. One the drivers door and it says passenger door onntue fis display. I also vag com the hold unlock/lock to on windows and the one click to unlock all doors. I also didn't copy my log. What do I need to alter in order to have the windows work but still make the car think I'm a US car ? Please could one of you smart ppl help me outttt

[Lukenkarl]

See a8techs list post above and go from there

[KingDan]

See a8techs list post above and go from there
But I don't get what he means. I'm sorry noob to this . thanks for the reply tho much appreciated

[KingDan]

Does that mean I reset to 06895 and whatever I want feature wise I add to that number ?

[KingDan]

reset to 06895 and try that as you have caused yourself a bit of a problem,list the variant of your vehicle saloon or avant

+00001 = GB-Alarm (not USA)
* +00002 = Confirmation Anti-Theft Warning System (Blink)
* +00004 = Selective Central Locking (SCL)
* +00008 = Anti-Theft Warning System
* +00016 = Rear Lid Release Locking at 5 km/h
* +00032 = Central Locking at 15 km/h (or 10 mph)
* +00064 = Comfort Function via Remote Control (not USA)
* +00128 = Right Hand Drive (RHD)
* +00256 = Avant
* +00512 = Confirmation Close via Remote (1x Blink)
* +01024 = Confirmation Anti-Theft Warning Sytem Horn Activation
* +02048 = Door-/Window Regulator Logic
* +04096 = Thatcham Anti-Theft Warning (not USA)
* +08192 = No Safe-Function
* +16384 = Side Windows with Insulated Glass

Note: Coding is the sum of the individual options. Not all options apply for all control moduls!

Hey man I'm sorry to bug but what does this mean I reset everything to 06895, then if I want a function from the above list I add it to that 06895 so if it's multiple things add them together and that totally I put in? I'm sorry I'm a big noob to this, but it bugs me that the dis shows passage her door when I open drivers and visa versa ! Also my lights don't flash when I lock my car all that happens is that the car beeps,

any help ell would be much appreciated