View Full Version : Please Help crankshaft sensor
chrissiebob
15-03-2009, 10:09 PM
I have an Audi A41.9tdi and have just changed the engine to a 2.0l tdi that came from a 2007 golf mk 5. The crankshaft sensor on the 2l tdi was to short and had a different style of plug at the end. I have cut the plug off and needto know what the wiring code is from the 1.9 crankshaft sensor the 2l. can you help please
kenney
15-03-2009, 10:21 PM
Need both engine codes
chrissiebob
16-03-2009, 07:53 PM
hi was told you needed both engine codes. the 2l engine code is DDK. The sensor wire colouring is black/brown, brown/blue and a purple one. The 1.9 engine code is AVB wire colouring is yellow, black, and a bare wire.
kenney
16-03-2009, 08:40 PM
Sorry you have lost me there mate,there is no such engine, DDK, is a gearbox code.
chrissiebob
16-03-2009, 09:09 PM
sorry mate misread it code is bdk for the 2l :beerchug:
chrissiebob
19-03-2009, 06:24 PM
can any 1 help me with this problem
Crasher
19-03-2009, 06:42 PM
BDK
Pin 1 black/red to pin 42 of ECU
Pin 2 Lilac to pin 58 of ECU
Pin 3 brown/blue to pin 57 of ECU
AVB
Pin 1 grey to pin 110 of the ECU
Pin 2 black/blue to pin 102 of the ECU
Pin 3 black and the shield for the wires.
I can see a problem here, the AVB has a magnetic impulse G28 sensor and the BDK has a hall effect G28 sensor.
chrissiebob
20-03-2009, 10:30 PM
thank you mate will let you know how i get on :beerchug:
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.