PDA

View Full Version : need part number for brake servo



technohippy
07-03-2009, 08:28 PM
i have a b6 1.9tdi (its an 02 plate se130 edition) i need a part number for the brake servo (as i suspect mine is full of water)
but audi arnt open again untill monday morning
and there is one on ebay that ends before monday part number 8D2612105A

Crasher
07-03-2009, 09:46 PM
You need 8E0 612 107 E. 8D2 612 105 A became 8D2 612 107 but requires master cylinder 8D2 611 021 and is for the 8D series A4 up to 2001, yours is an 8E.

technohippy
07-03-2009, 09:50 PM
according to the guy selling it it came off of an 05 plate a4

Crasher
07-03-2009, 11:38 PM
Not according to the numbers but there are odd differences like that. If he insists it is from a 2005 A4, buy it. The only 2005 model I can see it was used on is the Allroad.

uk_promonsta
08-03-2009, 01:00 AM
Hi, take a look at this one on ebay. item No 120383911893 think this might be what you are after just bought one for mine, same car as yours. Going to fit tomorrow so will let you know how it goes.

technohippy
08-03-2009, 09:55 AM
yeah i did see that on ebay but thought id try my luck with the other one as the starting bid is only £10 might pick up a bargin... even if its not for my car i could sell it on lol
how much are they from audi or vw themselves?

uk_promonsta
08-03-2009, 08:17 PM
£255 ish.

Crasher
08-03-2009, 08:19 PM
£255 ish.

So your copy of ETAK 7.1 is a locked out version too!

uk_promonsta
08-03-2009, 09:38 PM
sorry m8, i dont understand what you mean?