juppy
26-01-2009, 07:17 AM
Hi,
This is my first post, i hope someone has the answer for this. I've a 55 plate 1.9TDi 105BHP se plus, with auto lights, wipers etc. Sat night the bulb failure light came on, and it seemed to be the driver side dip filament that had blown, main was alright. I thought OK, I will get a bulb on Sat and replace it. However on Sat morning when i tried the lights all the headlights worked. However as we were coming home from a trip out yesterday the failure light once again came on and again no dip on the drivers side.
My question is it something as simple as a lose connection, or are there faults with the electrics that monitor the bulbs. Any pointers in the right direction would be greatfully received.
Garth
This is my first post, i hope someone has the answer for this. I've a 55 plate 1.9TDi 105BHP se plus, with auto lights, wipers etc. Sat night the bulb failure light came on, and it seemed to be the driver side dip filament that had blown, main was alright. I thought OK, I will get a bulb on Sat and replace it. However on Sat morning when i tried the lights all the headlights worked. However as we were coming home from a trip out yesterday the failure light once again came on and again no dip on the drivers side.
My question is it something as simple as a lose connection, or are there faults with the electrics that monitor the bulbs. Any pointers in the right direction would be greatfully received.
Garth