PDA

View Full Version : Please Help Audi 100 2.3E - delay in acceleration



yakub
24-01-2009, 05:10 PM
Good Day everyone;

Need urgent help, my Audi 100 2.3E , AAR engine have difficulty in acceleration. There's delay or hesitate to accelerate. Twice I was nearly hit by another car when getting out of junction.

I've changed new air flow and fuel distributor, the problems still exist. Pls help any one.:1zhelp:

kenney
24-01-2009, 05:22 PM
Hi Is the engine running properly on all cylinders?

yakub
25-01-2009, 03:26 PM
Kenny;

The engine running fine on all cylinders.

kenney
25-01-2009, 05:47 PM
Hi These engines are very fussy regarding Co content and ignition point. You will need a workshop to check this for you,Have you had a fault code read?

yakub
26-01-2009, 05:21 AM
Kenny;

Have no code reader. It's so difficult in Brunei. Everyone have to go to the Audi Dealer. The problem is that, this dealer mechanics are not experience. I've experienced sending my car, no problem solved but still the dealer charge me.

Can you advice me how to get one. I noticed that there are alot out there but no idea which one is suitable.

Yakub

kenney
26-01-2009, 02:28 PM
Hi These vehicles have blink code diagnostics,so all you need is a led test lamp.

ferris360
27-01-2009, 01:21 AM
sounds like timing tryed playing with dizzy / changing it

my old polo ran like this changed the dizzy set it up and good as a new :)