PDA

View Full Version : vw lupo dtc's help required



kblackburn
20-01-2009, 10:05 PM
Hi guy's,

a friend of mine has a lupo and the EPC light has been on and off over the weekend, I have a full registered vag com set up,and have done a scan this afternoon, can anyone point us in the right direction as to what might be causing the problem, i have attached the log file.

thanks

kevin

Tuesday,20,January,2009,16:29:51:17292
VCDS Version: Release 805.1
Data version: 20080823



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 6X - VW Lupo
Scan: 01 02 03 08 15 17 19 25 35 45 55 56

VIN: XXXXXXXXXXXXXXXXX Mileage: 42420km/26358miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 036-906-034-APE.lbl
Part No: 036 906 034 G
Component: MARELLI 4LV 2984
Coding: 00013
Shop #: WSC 00659

4 Faults Found:
17559 - Long Term Fuel Trim Additive Air; Bank 1; Range 1: System too Lean
P1151 - 35-00 - -
16786 - EGR System: Excessive Flow
P0402 - 35-10 - - - Intermittent
17598 - Linear O2 Sensor; Reference Voltage: Implausible
P1190 - 35-10 - - - Intermittent
17566 - Manifold Pressure Sensor (G71): Implausible Signal
P1158 - 35-10 - - - Intermittent
Readiness: 0000 0000

bearthebruce
21-01-2009, 02:14 PM
Three of the four faults listed in your scan are listed in the Ross-Tech Wiki (http://wiki.ross-tech.com/index.php/Category:Fault_Codes) Search the Wiki for information as to possible causes.

The O2 sensor fault could be the source of fuel trim problems. The fact that it is intermittent may just be a loose connection.