tommyb
15-01-2009, 06:42 PM
Scanned an LT van that had traction control light flashing.
Showing Brake light switch non plausable signal (ok i know the switches cause the lights to flash) Checked operation of lights at back and all are fine. tried adjusting switch as its the one that screws in length and has a lock nut either side of bracket. (NOW i was able to clear the codes but still lamp flashed, so told garage to get a new switch anyway), even with the switch off the van disconnected and van running it isnt showing any codes that switch is disconnected etc, is this normall .
Hope the New Switch sorts this :Blush2:
Showing Brake light switch non plausable signal (ok i know the switches cause the lights to flash) Checked operation of lights at back and all are fine. tried adjusting switch as its the one that screws in length and has a lock nut either side of bracket. (NOW i was able to clear the codes but still lamp flashed, so told garage to get a new switch anyway), even with the switch off the van disconnected and van running it isnt showing any codes that switch is disconnected etc, is this normall .
Hope the New Switch sorts this :Blush2: