hi

[mance7]

hi im new to all this i think im posting in the righ place,,,,
i have a 2006 passat i have all the tools to do the rear brakes pads on my passat with EPB. before i do this i wanted to know do i wind the piston back like we did on the older passat?

[stevenson1961]

no defo not

[phil miller]

on some epb you need to use a scan tool to move the piston back, as yet i havent had the pleasure of replacing pads on a passat with epb

[johnloaderuk]

Read this http://www.vwaudiforum.co.uk/forum/showthread.php?t=86891&highlight=rear+pistons a bit of info here on what not to do. If you do a search a few more previous posts will also give some info.

[phil miller]

Read this http://www.vwaudiforum.co.uk/forum/showthread.php?t=86891&highlight=rear+pistons a bit of info here on what not to do. If you do a search a few more previous posts will also give some info.

says it all really......... let someone else break it lol

[VAGMAN54]

they are easy enough to do with the right tool,you will need a scan tool that can do the epb the instructions are on the ross tech web site,as long as the pads arent down to the steel you wont have a problem.........but if they are down to the steel then i hope you have a large piggy bank.......