PDA

View Full Version : Camber



ghostrider
23-11-2008, 12:56 PM
Just had 4-wheel alignment done on my car and the camber reading is 2degrees 13minutes out, my question is can this be adjusted or is something bent on the suspension or even worse the :aargh4:chassis.

My car is a 2002 A4 1.9 Tdi 130 Avant.
Thanks in advance.

kenney
23-11-2008, 01:04 PM
Hi The front wheel camber cannot be adjusted.
By moving the subframe, it is possible to centralise the camber setting symmetrically within the specified tolerance range.
The rear wheel camber can be adjusted

ghostrider
23-11-2008, 01:25 PM
Thanks, do audi dealerships do this and would i need the toe reset again as well.

kenney
23-11-2008, 01:32 PM
Yes and yes

ghostrider
23-11-2008, 01:43 PM
Thanks for sharp replies Kenney :beerchug: right next question, can anyone recommend an independant in central Scotland,Falkirk-Stirling area other than Stirling Audi (have issues with using them) that have the ability to do this correctly as in adjust the sub-frame to correct the camber.