Vw Dtc 19463

[Delco]

Could someone please shed more light on VW Diagnostic Table Code 19463

This will be much appreciated.

Thanks.

[elPaulio]

Hi Delco,

What car, age, engine you got?

Did a quick google search and found this http://forums.tdiclub.com/showthread.php?t=229844

They show the following:

Address 01: Engine
Control Module Part Number: 038 906 016 R
Component and/or Version: RC s2cP EDC G000AG 8900
Software Coding: 0150034
Work Shop Code: WSC 09216
4 Faults Found:
19463 - Camshaft Position Sensor (G40): No Signal
P3007 - 000 - -
Freeze Frame:
RPM: 819 /min
Torque: 70.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 13.38 V
Bin. Bits: 00001000
Idle Stabilization: 0.0°KW
(no units): 48.0

Not sure if thats the same for your car as that was for a Passat.

But if thats the same I would say your camshft position sensor is either faulty or the plug needs a clean.

Paul :biglaugh:

[Delco]

Hi Paul,
Thanks for the reply, this is almost the exact error message that VW South Africa have now supplied my mechanic with. They have it as crankshaft angle sensor, however the mechanics will have to dismantle gearbox and clutch to get to it. Will post after Tuesday or Wednesday what results came of.
Have a good weekend.

[Delco]

Paul,

Sorry I didn't really answer your question, it's a VW Polo Playa 1.4 TDi 2003 (9N).

Cheers