PDA

View Full Version : Door sela not sealing



jackg
16-11-2008, 07:41 PM
1996 Passat 1.9TDi saloon

I replaced the door seals on the passengers side, front and rear, the well was a well of water, the carpets were soaking but not rusting fortunately.

These were factory seals, I made the join at the bottom.

Now water is coming in via the new door seal at the front on the passenger side with the new seal. The seal is wet at the bottom and my guess is that the water is coming in at that point from the outside.

So err what can I do, adjust the hinges so the door angle relative to the chassis is different?

I am lost now.

Any ideas please