PDA

View Full Version : Procon 10?



Autostadt
14-11-2008, 08:47 PM
Hi, I have a late 100 avant ('94). Was Procon 10 fitted as standard.? If not, what are the tell-tale signs. Thanks

zollaf
18-11-2008, 10:41 PM
dont know if it was fitted to yours or not, but if you look around the bottom of the engine bay, at the back you will see a large lump of metal with thick <10mm or so > steel cables attatched.if you remove the trim panel from under the steering column you will see the other end of one of the cables attatched to the column. behind the inner sill trim panel on the front door openings you will find the seatbelt pre tensioning cables. also theres sometimes a procon ten sticker in the rear window. lol. theres some good videos of procon ten on you tube.

Autostadt
20-11-2008, 12:30 AM
Thanks for that. I'll have a look in the morning, will be nice to know if it is there or not.