grayclose31
14-08-2008, 06:35 PM
Hi All,
This is my fist post and i hope that i can find some help to my problem.
I bought a bypass relay kit from P F Jones of Manchester today and i was told that i had to wire both the supply to the tail light AND the supply to the brake light to the RED wire on the relay.
I have done this but there seems to be a slight fault :- with the side/head lights on all seems ok when i depress the brake but, with the side/head lights off the side that i have tapped into lights both the brake and tail light when i just press the brake.
All other functions seem to work ok.
After looking at their web site the wiring diagram shows that i should use the black and brown wires for the tail lights and the red only for the stop lights, However the man in the shop said i did not need to use these.
The car is in bits and i am sat here in the garage totaly lost now.
Any help would be great.
Chris.:(
This is my fist post and i hope that i can find some help to my problem.
I bought a bypass relay kit from P F Jones of Manchester today and i was told that i had to wire both the supply to the tail light AND the supply to the brake light to the RED wire on the relay.
I have done this but there seems to be a slight fault :- with the side/head lights on all seems ok when i depress the brake but, with the side/head lights off the side that i have tapped into lights both the brake and tail light when i just press the brake.
All other functions seem to work ok.
After looking at their web site the wiring diagram shows that i should use the black and brown wires for the tail lights and the red only for the stop lights, However the man in the shop said i did not need to use these.
The car is in bits and i am sat here in the garage totaly lost now.
Any help would be great.
Chris.:(