LED Back Lights

[firelogic]

Has someone order the LED backlights yet? Please share if you have the parts number or the DIY installation :biggthump

http://i279.photobucket.com/albums/kk130/firelogic2008/f3200ca42941fa3c200c28dde93806fa.jpg
http://i279.photobucket.com/albums/kk130/firelogic2008/c73486f3c7762a97d9f76baf85c2b61d.jpg

[allya]

I would love to fit these too so hopefully someone out there will be able to help...

[Audi-Jocke]

Hi!
I'm writing from Sweden and the parts number for the LED Back lights is :
Left: 8K5 945 093 B , Right: 8K5 945 094 B , Second Left: 8K5 945 095 B , Second Right. 8K5 945 096 B. Good Luck!

[Soot1e]

Does anyone have the part numbers for the avant?

[Audi-Jocke]

Part numbers for Avant:
Inner left 8K9 945 093 B
Inner right 8K9 945 094 B

Outer left 8K9 945 095 B
Outer right 8K9 945 096 B

[Dans]

Curious to know the cost of these..............anyone?

Also, whilst I also think they look very cool, the fact that I will never see them in action myself would suggest that not buying them is the best option ;)

[A1287210]

Rumours on an international audi forum were they were getting close to 1K (this might have been dollars)

[Ragtop]

Spanish ETKA:

Berlina:
8K5 945 093 B - Piloto interior izquierdo - 109,97€
8K5 945 094 B - Piloto interior derecho - 109,97€
8K5 945 095 B - Piloto exterior izquierdo - 136,30€
8K5 945 096 B - Piloto exterior derecho - 136,30€

Avant:
8K9 945 093 B - Piloto interior izquierdo - 109,97€
8K9 945 094 B - Piloto interior derecho - 109,97€
8K9 945 095 B - Piloto exterior izquierdo - 136,30€
8K9 945 096 B - Piloto exterior derecho - 136,30€

(izquierdo=left ; derecho=right ; interior=inner ; exterior=Outer)

:beerchug:

[jabicho]

I´m afraid they´re just a combination of led lights for position and braking and the rest are ordinary bulbs, not fully led technology for our a4´s at the moment...cheers

[kodkod.84]

They'll still look the biz if they are anything like the A6 LED back lights.

[Soot1e]

Prices quoted from my dealer as follows:

Outer units £92.01 each = £184.02
Inner units £74.24 each = £148.48

Total =£332.50 + VAT


:scared: =£382.38 :scared:

Still to find out if re-coding is required.

[audi4everr]

Prices quoted from my dealer as follows:

Outer units £92.01 each = £184.02
Inner units £74.24 each = £148.48

Total =£332.50 + VAT


:scared: =£382.38 :scared:

Still to find out if re-coding is required.
Hello, did you find any information about recoding.
I just order one set of the new leds tail lights and Im looking about fiting,coding instructions
THANK YOU

[Soot1e]

Hello, did you find any information about recoding.
I just order one set of the new leds tail lights and Im looking about fiting,coding instructions
THANK YOU

Sorry, no info unfortunately, I think the dealer was waiting for me to order a set and then would sort out any problems if they materialised. I have not plucked up the courage to fork out for these as yet, other priorities at the moment.

[Bristle Hound]

You could always buy some LED bulbs off eBay ...
:beerchug:

[sabingli]

did anyone manage to retro fit the led back lights yet?

[audi4everr]

not yet but this days I will receve the new led lights and I will put ton the forum all information what I will get

[Macron-1]

Dear collegues from UK,

as in one of the russian joke: " Are you still boiling? Than we are comeing to you..." :)))

I want you to say, that in Russia, we have alreadu the first LED installation on A4 B8 1,8T.

Glad to think, that this is can be the first installation of the led lights in the WORLD :))) I am happy, that this happen in Russia :)

Here is the Pictures of the installation rezults: http://photofile.ru/users/macron-1/115315688/

Don't forget, that for the installation you should have the special jumpers for DIOD lights. here The numbers:

Jumper #1: 3B0972705 (2 pcs.)
Jumper #2: 8K0973703E (2 pcs.)

We have some troubles with programming of the comfort block, but we plan to fix this in a short time:)


http://macron-1.users.photofile.ru/photo/macron-1/115315688/large/125116909.jpg
http://macron-1.users.photofile.ru/photo/macron-1/115315688/large/125116911.jpg

[audi4everr]

I made this 5 days ago but if somebody need more info, Iwill help you with plesure

[Macron-1]

I made this 5 days ago but if somebody need more info, Iwill help you with plesure

Hello,

as i see on your pictures, - you have the same problem with lamp, that is lighting.

But on the pictures i don't see any problems with Car Computer. Am i right understand, that the car says OK about updated tail lights ?

For ex., mu car pc tell me, that the tail lights are broken. What about yours ?

[audi4everr]

SO, do you admit that the romanian instalation is better?

[audi4everr]

FIRST OF ALL THE BORNET IT IS LOCATED ON THE RIGHT SIDE IN THE TRUNK
YOU DO NOT NEED TO CUT ANY WIRE ON THE LAMPS ALL THE MODIFICATION ARE MADE ON THE RIGHT SIDE AT THE BORNET

OK, STARTING WITH LEFT HAND SIDE
on the brown soket you have a gray/black wire , that is the wire that you have to cut and to conect the lamp side to gray/white wire and the bornet side to a 6r8 20w resistor,wired to ground

RIGHT HAND SIDE
on the black soket you have a gray wire , that is the wire that you have to cut and to conect the lamp side to gray/blue wire from the brown soket and the bornet side to a 6r8 20w resistor, wired to ground
ANY MORE QUESTIONS?

[Macron-1]

FIRST OF ALL THE BORNET IT IS LOCATED ON THE RIGHT SIDE IN THE TRUNK
YOU DO NOT NEED TO CUT ANY WIRE ON THE LAMPS ALL THE MODIFICATION ARE MADE ON THE RIGHT SIDE AT THE BORNET

OK, STARTING WITH LEFT HAND SIDE
on the brown soket you have a gray/black wire , that is the wire that you have to cut and to conect the lamp side to gray/white wire and the bornet side to a 6r8 20w resistor,wired to ground

RIGHT HAND SIDE
on the black soket you have a gray wire , that is the wire that you have to cut and to conect the lamp side to gray/blue wire from the brown soket and the bornet side to a 6r8 20w resistor, wired to ground
ANY MORE QUESTIONS?

Dear Audi4ever,

i think your installation is better than mine :)

I don't have a question, i undarstand what to do, but i need little more help from your side. Is it possible to make a foto with all connection on led lights ?

I am excited that i am do everything right. Could i ask you about some fotos to make shure that i do everything right ?

If you need, i can make a foto of my wire installation on all led lights ?

[audi4everr]

left
So, on the side lamps you put the pins in the same order 1,2,3
on the inner side
1-brown
2-black
3-gray/black
4-gray/yellow
5-free

right
side lamp same order 1,2,3
inner
1-free
2-grey/white
3-grey
4-black/white
5-brown
picture I will make tomorow
good luck

[Macron-1]

Ok, deal, thank you! :)))

I will make a pic today how it's look like on my car :)

But for full installation without problems with car PC, i need 6r8 20w resistor, which should be install into the each wire.

Right ?

[audi4everr]

Ok, deal, thank you! :)))

I will make a pic today how it's look like on my car :)

But for full installation without problems with car PC, i need 6r8 20w resistor, which should be install into the each wire.

Right ?
that is right

[Macron-1]

that is right

Ugu...ok.

I has talk today with our local Audi dealer. They told me, that when service period on 15 000 km been come, you bring the car to dealer for service and after full pc car scan and verification base reference data with audi.de, the scan machine may find this resistors and it show the mistake in list of scaning.

How do you think, is this scan procedure may find this resistors or not ?

[audi4everr]

My dear friend I am working in this business for 5 years , if you know the resistor 6r8 20w it is exactly like the 21w bulb so the car it is not "see"the difference.
I scan the car after the change of the lamps and it is no error

[Macron-1]

My dear friend I am working in this business for 5 years , if you know the resistor 6r8 20w it is exactly like the 21w bulb so the car it is not "see"the difference.
I scan the car after the change of the lamps and it is no error

Ugu, ok, understand. Ok, glad to hear that it's work. With fotos i hope to see how this resistor look's like, - i gonna to find the same here :)

One more question: as i seen on your fotos, the antimist lights are lighting up, as on my car. How do you plan to fix this problem ? Mayby just remove this lamp and that's it ? :)

[audi4everr]

if you want to cancel that fog rear light you have to put one more set of resistors , but you better wait for new info about coding of that computer.
There is more thinks that will be availeble soon
leave those fog lights like that for the moment
all the best

[Macron-1]

if you want to cancel that fog rear light you have to put one more set of resistors , but you better wait for new info about coding of that computer.
There is more thinks that will be availeble soon
leave those fog lights like that for the moment
all the best

Ok. i will be wait for more information soon.

One more little question: when you put the brake pedal, only left and right led lamp are turning on ? Rear light have the same type of lighting ?

When i put brake pedal, there is only left and right diod lamps are lighting higher. The rear light have the same light.

I has check today the wires. There is the same connections as yours :) Glad to hear, that we have the same colors of wire :))))

[Macron-1]

I am find the specification of resistor. Is this what you used ? :)

This is link of resistor pic and spec: LINK (http://www.soundlabsgroup.com.au/p/MU-MRESIST-6R8-20W/6.8+Ohm+20W+MRESIST+Supreme+Resistor)

6r8 - this is 6,8 Ohm ? :)

http://www.soundlabsgroup.com.au/mm5/graphics/mundorf/mundorf-mresist.jpg

Thank's a lot again! :)

[Macron-1]

if you want to cancel that fog rear light you have to put one more set of resistors , but you better wait for new info about coding of that computer.
There is more thinks that will be availeble soon
leave those fog lights like that for the moment
all the best

This fog light don't trouble me :) . On my side, i am trying to get the VIN number of S4 car for compareing the original A4 code for 46 block and S4 code for the same block.

When i put the brake padal, only left and right lamp are lighting higher. On your car is the same situation? :Blush2:

[audi4everr]

OK, STARTING WITH LEFT HAND SIDE
on the brown soket you have a gray/black wire , that is the wire that you have to cut and to conect the lamp side to gray/white wire and the bornet side to a 6r8 20w resistor,wired to ground

RIGHT HAND SIDE
on the black soket you have a gray wire , that is the wire that you have to cut and to conect the lamp side to gray/blue wire from the brown soket and the bornet side to a 6r8 20w resistor, wired to ground
gray/white wire it is the parking light and the brake light from the left side and the gray/black is the center left parking and brake so
cut the gray/black from brown soket at 5 cm. long from the soket and the lamp side put togheder with gray/white wire and the soket side to that resistor.

the same think to right side but with the wires witch I told you

[audi4everr]

resistor 6.8 ohm 20w, I put bouth of them on the same radiator becouse is easyer and is 100% safe

[Macron-1]

Thank you very much, my friend :)

This is not so easy, as i think before, but i shold try to do everything, what you recommend me. I will make a foto today and show you how i understood :)
Today in the evening i will post the message. Now going to work :)

Thank you again :)

[Macron-1]

Dear friend,

i wrote your description and look on the scheme and i do not undarstand correctly as it is should be.

I sew a differens in wire colors: or you have a mistake, or i don't undarstand correctly :)

I am please you to check the picture regarding wire colors.

And secondary, this is the link of DOC file, which i please to fill (same as on PIC), because your pict is not undersanding for me :( This is link for DOC (http://webfile.ru/3053883)
Or you may print the pic down and write on it :)) As you wish :)
Thank you again!
http://macron-1.users.photofile.ru/photo/macron-1/115315688/xlarge/125240878.jpg

[audi4everr]

Yes, I check the colors and are the same like in my car , so
on the right side open the cover and you will see a electronic module with 4 plugs
you have to work with brown and black plugs, the square ones
on the brown soket you have a gray/black wire , that is the wire that you have to cut and to conect the lamp side to gray/white wire and the module side to a 6r8 20w resistor,wired to ground

on the black soket you have a gray wire , that is the wire that you have to cut and to conect the lamp side to gray/blue wire from the brown soket and the module side to a 6r8 20w resistor, wired to ground
it is clear now?

[Macron-1]

Aga...now i undarstand which place in car you mean :))

Before, i can't undarstand which brown socket you are talking about and only after opening the right side hollow cover, i found all details :)

Yes, it's nos sow easy, but i should try to do this :)

Am i right understand, that i need only 2 resistors ?

[audi4everr]

yes, only two resistors will make the job.
I will find a way to code the fog lights to lite up only for fog not for parking light.
I will send you all the information when I will do this
ALL THE BEST

[Macron-1]

yes, only two resistors will make the job.
I will find a way to code the fog lights to lite up only for fog not for parking light.
I will send you all the information when I will do this
ALL THE BEST

:))) Gooood :))) our dealer just thinking how to install the lamps, but you and - already - me (with your help), know how it gonna work :))))

One little question regarding upside pic with your comments:

As i know, the left brake lamp and right brake lamp has the same wire colors. (LEFT: 1-gray-white, 2-brown, 3-gray blue, RIGHT: 3-gray-white, 2-brown, 1-gray blue)

On your scheme, form left side you are use the GRAY-WHITE wire, but from the RIGHT side you use the different wire: GRAY-BLUE.

Is there is ok ? :)

[audi4everr]

:))) Gooood :))) Our Dealer Just Thinking How To Install The Lamps, But You And - Already - Me (with Your Help), Know How It Gonna Work :))))

One Little Question Regarding Upside Pic With Your Comments:

As I Know, The Left Brake Lamp And Right Brake Lamp Has The Same Wire Colors. (left: 1-gray-white, 2-brown, 3-gray Blue, right: 3-gray-white, 2-brown, 1-gray Blue)

On Your Scheme, Form Left Side You Are Use The Gray-white Wire, But From The Right Side You Use The Different Wire: Gray-blue.

Is There Is Ok ? :)
On My Car Is Gray/blue , But If You Have Gray/white You Will Use That One

[Macron-1]

Ok. :)

I think on this hollidays i will install that we are describing :) When install job should be done, i'll show you the result. :)

And off course i will be wait form you any information regarding encoding Car PC for turning off the lighting fog lamp :)

[Jop]

I saw a B8 saloon today with the rear LED's so obviously they are now available in the UK. - They looked like they were on an SE which I found odd.

I want some.

[Macron-1]

audi4everr (http://www.vwaudiforum.co.uk/forum/member.php?u=92354)

Dear friend,

today i has install all diods lamps based on your advise and technical comments :)) Thank you very much for your time :)

I very happy to see, when i breaking the break pedal, - all diod lamps are ligting :)) Off course - i didn't see this effect, but i know that they are all lighting, like on others audi cars with diod lamps :) (AllRoad, S5 etc.)

Bytheway, i fix the problems with fog laps: they are not lighting all time like before :))) Do you know how i fix thet problem ??? :))

You don't belive - you are again help me in this :) I has install resistor into fog wire inseries connection: wire---resistor---wire

because i didn't know what kind of resistor am i need to use for a fog lamp, i has bye the full series of those 20wt resistor, begin from 0,1 Ohm and continue to 5,6 Ohm. There are was near 8 type of those resistor :)
We are has checked all of them, and only 5,6Ohm 20Wt go very well: the FOG lamp are not lighting when the car is turning on.

When we connect those resistor (5,6 Ohm 20Wt) to one of the fog lamp, we push the key to 2 time (full,without start engine) the fog lamp did not lughting, but when we are push the fog button, - the button has blink. We has decide, that our Idea with resistor insert are fault. I sad, - OK, put all resistor to all fog wires, i don't need this fog lamp, - a want to see the diods.

When we install resistors into both fog wire and i run the engine, -Wuualllya...I has put the fog lump again, an mirracle - the fog lamp are turning ON :))) Iiittssss...wooorkkkk :))))

I was very happy :)

We has chack the full system - no one problem we has not find :) Everything is work :)))

http://macron-1.users.photofile.ru/photo/macron-1/115315688/large/125300774.jpghttp://macron-1.users.photofile.ru/photo/macron-1/115315688/large/125300773.jpg

[eos97]

wow there fab, any idea if i can get some like this for my golf mk4?:biglaugh:

[RickT]

So these on the road this evening on my way home... looked NICE!!

[luk2011]

I re-draw the schematic what i found in this thread, and i post it here for a clearence visualisation.

I ask you to verify if everything it's correct in this schematic, and to tell us if it's something wrong, eventually to modify the schematic and repost it the correct version.

thank you

[Macron-1]

Dear Luk,

your picture is very small with low resolution. It is very difficult to undarstand corretly the type ow wire and other details.

Please do your pic the better quality and i will check your connection!

[AsSyX]

i've a news from kufatec for a4 avant :

http://www.kufatec.de/shop/product_info.php/info/p1403_Bundle-LED-Rear-Lights-Audi-A4-S4-Avant.html


still looking for a a4 "classic" :confused:

[audi4everr]

the gays from OEMPLUS.US have a solution but they sell all kit with the lamps also not only the adapter.
If you are intrested you can contact them
Goog luck

[AsSyX]

if you have another solution, less expensive i'm interrested ;)

[luk2011]

Bundle LED Rear Lights Audi A4/S4


http://www.kufatec.de/shop/product_info.php/info/p1404_Bundle-LED-Rear-Lights-Audi-A4-S4.html/XTCsid/f6bb8178af80de29118eedaa41b306c9


here it's the Kit for Sedan/Limousine model of A4 B8 for LED tail lights

[allanmmck]

According to the April 2009 Brochure - Rear LED lights are now Standard on the S line models !!

A month too late for mine!!

[ScottyUK]

On MY2010 cars, rear LEDs will be on "A4 S line and non S line with optional Adaptive light".

[luk2011]

I have found another Firm in Germany who sell LED tail lights Kit for A4 B8


http://cgi.ebay.at/S4-LED-Rueckleuchten-Limousine-Audi-A4-8K-B8-Komplett_W0QQitemZ170320908665QQcmdZViewItemQQptZA utoteile_Zubeh%C3%B6r?hash=item170320908665&_trksid=p3286.c0.m14&_trkparms=72%3A1229|66%3A4|65%3A12|39%3A1|240%3A13 18


http://www.need4street.de/product_info.php/info/p3271_S4-Limousine-LED-R-ckleuchten-inkl--Adapter-f-r-Codierung-und-Stecker.html


Need4Street Automotive Group Inh. Holger Auernhammer
HolgerAuernhammer
Franz-Kafka-Weg 44
90513Zirndorf
Deutschland



Telefon: 0911|36062262
E-Mail: shop@need4street.de

[2.7 S-line]

I have found another Firm in Germany who sell LED tail lights Kit for A4 B8


http://cgi.ebay.at/S4-LED-Rueckleuchten-Limousine-Audi-A4-8K-B8-Komplett_W0QQitemZ170320908665QQcmdZViewItemQQptZA utoteile_Zubeh%C3%B6r?hash=item170320908665&_trksid=p3286.c0.m14&_trkparms=72%3A1229|66%3A4|65%3A12|39%3A1|240%3A13 18 (http://cgi.ebay.at/S4-LED-Rueckleuchten-Limousine-Audi-A4-8K-B8-Komplett_W0QQitemZ170320908665QQcmdZViewItemQQptZA utoteile_Zubeh%C3%B6r?hash=item170320908665&_trksid=p3286.c0.m14&_trkparms=72%3A1229%7C66%3A4%7C65%3A12%7C39%3A1%7C 240%3A1318)


http://www.need4street.de/product_info.php/info/p3271_S4-Limousine-LED-R-ckleuchten-inkl--Adapter-f-r-Codierung-und-Stecker.html



must admit i'm quite tempted (thanks for posting the links)

the ebay posting does appear to say not for america or right hand drive though ?

[luk2011]

http://www.kufatec.de/shop/product_info.php/info/p1404_Bundle-LED-Rear-Lights-Audi-A4-S4.html



Note


Not suitable for USA vehicles




Yes, it's true, even from Kufatec website say this : Not suitable for USA vehicles ( and for RHD vehicles ).


But, I THINK ( i'm not 100% sure ), for USA you can get it from here :



http://oempl.us/index.php?main_page=product_info&cPath=60_78_142&products_id=923


Audi Models :: A4/S4/RS4 (8K) :: Lighting :: Taillights - EU Amber (LED 2009+)

Taillights - EU Amber (LED 2009+)

[2.7 S-line]

it was the not for right hand drive that drew my attention (i'm in the UK) - can't see what difference left or right hand drive makes to the rear lights ? :confused:

[luk2011]

Write an email to Kufatec and ask them about RHD LED tail lights.

[TallioN]

Hi)
some experience from Russia with Avant )
No errors, no SW upgrade, no module changes ) Just add 4 20 Ohm resistors

http://photos.streamphoto.ru/b/5/4/8571dabd0e011aca1095ed5448d6c45b.jpg

http://photos.streamphoto.ru/d/f/a/08791b51a601a4b867b4b0d1bcf89afd.jpg

http://photos.streamphoto.ru/f/1/c/0f755d902b557ea572c7de2b5a485c1f.jpg

http://photos.streamphoto.ru/7/2/2/77efa1f03293bb4723eeae9a7a997227.jpg


http://photos.streamphoto.ru/e/5/e/de6ce60b264a3808b2a7b9b920d32e5e.jpg

[vizik8]

Kufatec has a OBD doggle that activates the LED lights function. Does anyone know what codes it has changed? Can we use VAGCOM to set this?

[phamoui]

I need the same think. Just installed the LED taillights now needs to resolve the errors. Only the VAG with the codes.. anyone?

[nm2003]

Hi All,

I had a look at the pictures of the LED Back Lights posted, and compared them to the non-LED Back Lights on my A4 (at night), and I actually like the non-LED Back Lights.

I think it is personal preference, but I am happy with the simple, elegant look of the non-LED back lights. The LED back lights are too much in your face.

[Plife]

Anyone done this on a RHD car yet?

[Plife]

Got a set from Kufatec and fitted. Nice and easy to fit and they look quality!!!:beerchug: Dongle light is supposed to go out when the coding is finished (remove error codes) but after 2 hours it was still lit, so I pulled it out and luckily no issues!!

[gregpawley]

Admit I’m very tempted by this mod, just wondered if anyone has to recode using VAG.COM or do they rely on the resistor work around?
When the car goes back to the dealers for service etc, will their all knowing computer realise that the car has been modified by the dongle and reinstall the generic software, if so can the dongle be used again or is it a one shot affair.
If it can be used is there anyone that would be willing for a fee to loan out the dongle allowing others to purchase the lights only using the part numbers posted earlier in this thread?

Audi A4 2.0T, Lava Grey, Piano black inserts, S Line Executive, Heated front seats, Bang & Olufsen, Telephone prep low, Parking Plus, Hill hold assist, Cruise control, Interior light package, Folding mirrors.

[Plife]

Admit I’m very tempted by this mod, just wondered if anyone has to recode using VAG.COM or do they rely on the resistor work around?
When the car goes back to the dealers for service etc, will their all knowing computer realise that the car has been modified by the dongle and reinstall the generic software, if so can the dongle be used again or is it a one shot affair.
If it can be used is there anyone that would be willing for a fee to loan out the dongle allowing others to purchase the lights only using the part numbers posted earlier in this thread?

Audi A4 2.0T, Lava Grey, Piano black inserts, S Line Executive, Heated front seats, Bang & Olufsen, Telephone prep low, Parking Plus, Hill hold assist, Cruise control, Interior light package, Folding mirrors.

Dongle says it is a one time use. Time will tell what happens when it goes to the dealer! I have not had to use VAG COM but wonder if the coding could be done soley by this, I am sure it could!

[LLOYDYCHOPS]

Dongle says it is a one time use. Time will tell what happens when it goes to the dealer! I have not had to use VAG COM but wonder if the coding could be done soley by this, I am sure it could!

Hi, I've just bought 100% OEM LED Tail lights from BKS Tuning they come with a Audi CD instructions to retro fit them, I'm taking my car to a VAG garage to
have the car programmed, the CD Instructions state once fitted you require a VAS 5010 diagnostic machine, and enter code 05060 into the SVM, I'll let you know if it all goes well, fitments this Friday!..i hope it does because these lights and harnesses cost me 400 smachers...I have a 3.0TDI Quattro SE 2008

[jagicolo]

Well, maybe some one can give me a hand
I bought three out of four led taillights for my 2009 audi a4 b8 1.8t (german car) as:
right (2)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250837854457&viewitem=&sspagename=STRK%3AMEWNX%3AIT
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250837855310&viewitem=&sspagename=STRK%3AMEWNX%3AIT
left (1)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250836727245&viewitem=&sspagename=STRK%3AMEWNX%3AIT

I missed the trunk 8K5945093B led tailight auction, but after reading this thread I am not sure if I could keep looking for it.
I need to know how can i make this led lights work in my a4, what exactly do i have to buy?
Any suggestions where to get the 8K5945093B for a decent price
thanks