PDA

View Full Version : In-boot 12V power supply not working



JayB5UK
07-07-2008, 11:31 AM
Hi, any ideas on fixing the above?

Tried plugging in a mini fridge to keep some bevvies cool on a day out but had no power from the one in the boot.

Does anyone know if it has a dedicated fuse or if it shares one? - or what else to try to cure it?

Cheers all.

richard@thebrae
07-07-2008, 04:46 PM
Hi, the fuse is probably blown, it is on the relay panel above the pedals.
15amp, and you need to drop the dash panel (4 screws) 2 in the fuse panel at the side, and 2 in the cubby holes under the steering wheel.

JayB5UK
08-07-2008, 11:12 AM
cheers i assume it has a dedicated fuse then?

I'll check it out, thanks.

richard@thebrae
08-07-2008, 02:18 PM
That is correct, and if you have two sockets like the estate then there is two fuses, one for each socket.
Further to this if you have a footwell socket in the rear then this also has a seperate fuse in the same are. It is above the boot ones and to the right and it is a wee bit difficult to see, but it is there.
Thanks to Snapdragon in the past who helped me on this same issue before I had a workshop Manual.

JayB5UK
09-07-2008, 12:18 PM
Thanks, i'll have a look when the rain stops!

Only 1 in the boot of the saloon....