A4 Convertible Alloys fit a vw t4?

[moosemax75]

Hi sorry if this is in the wrong section (newbie - doh)

I've been offered some mint A4 16" alloys off a 18month convertible.

Can anyone tell me if they will fit a VW 98 swb T4 Transporter? According to my mate they have ET50 on the inside of the rim if this helps?

Many thanks

MOOSE

[Sam]

Transporter has a PCD of 5x112 an ET of 25 to 42 and a centre bore of 57.1

As long as these new wheels are the same PCD everything else can be overcome.

[moosemax75]

Thanks for the reply. Will the offset of 50 be a problem, ie rubbing on the rims or similar then?

cheers again

Moose

[Sam]

If your current rims have an offset of 25 (ET 25) then (assuming the new rims are the same width as the old rims) fitting ET50 will suck the wheels 25mm.

The inner lip of the rim will then, more than likely, foul on the suspension struts. Asthetically, it'd look odd as well, with your rims being 25mm further "into" the arch

[Ben]

so would you need a 25mm spacer?

i know nowt abot this so just learning:Blush:

[Sam]

Yup, that would give the new rims the same ET as the old ones :)

[onzarob]

so would you need a 25mm spacer?

i know nowt abot this so just learning:Blush:

Yes that will work, but remebers its a Van so the loading is greater, so not recommended, also you should get Van rated alloys for the same reason.

[moosemax75]

This is getting confusing :confused:

My standard vw steelies have the following on the rim

6J15H2 DIN DOT D15x6 ET55

and are running the following tyres

195/70/R15C 104/102R max load 900kg

The Audi alloys have the following on them

6.5Jx16H2 ET50

and the tyres are

205/55R/16 90V max load 600kg

Does this extra info help diagnose if they're ok or not

HEEEEELLLLLLLLLLLLP!!!;)

Cheers again

MOOSE

[Sam]

Right, facts and figures at last :biglaugh:

Current set up



Width - 6J
Size - 15
Offset - ET55
Tyres - 195/70/R15C 104/102R max load 900kg


Potential set up



Width 6.5J
Size - 16
Offset - ET50
Tyres - 205/55R/16 90V max load 600kg

OK!

The tyres on the new wheels are not only the wrong load rating they're also the wrong size so your speedo will misread. Ideally you'd want 205/60/16 or 195/65/16 - depends on what is the cheapest in the correct load/speed rating.

The inner edge of the new wheels will sit 1mm further in than the original wheels. The outer edge will stick out an additional 11mm.

[Crasher]

Ohh look, more spam for me to enter my credit card details into, ohh joy and fun, let me enjoy destroying my credit rating. All spammers must die!