redboots
11-06-2008, 07:10 PM
Hi All,
could use a bit of help/advice.
The problem I have, I would have sworn was a failing clutch slave cylinder, bit I have a cable!
I replaced the cable as I thought the automatic adjuster was up the swanney.
It seemed to improve things for a while but now its back to crunching gear shifts and or not being able to get it into 1st with the motor running.
If I select 1st and then start the motor, there is some drag but the amount varies. Then, letting out the clutch, it does not bite until about half way out:confused:
Using revs and clutchless shifts works ok but sometimes requires a start in 1st.
The problem comes and goes. In one trip it will appear and disappear though today it has not gone away...
Any ideas please??
Cheers,
John
could use a bit of help/advice.
The problem I have, I would have sworn was a failing clutch slave cylinder, bit I have a cable!
I replaced the cable as I thought the automatic adjuster was up the swanney.
It seemed to improve things for a while but now its back to crunching gear shifts and or not being able to get it into 1st with the motor running.
If I select 1st and then start the motor, there is some drag but the amount varies. Then, letting out the clutch, it does not bite until about half way out:confused:
Using revs and clutchless shifts works ok but sometimes requires a start in 1st.
The problem comes and goes. In one trip it will appear and disappear though today it has not gone away...
Any ideas please??
Cheers,
John