PDA

View Full Version : Hello and Thank you in advance - Koni FSD question



TTQC180Canada
31-05-2008, 07:56 PM
First of all, hello everyone. I live in London...the other London that is. Ontario Canada to be exact.

I've been a TT owner for almost 4 yrs now but a fan since I first laid eyes on the prototype!

I recently installed Eibach ProKit with FSD shocks. The car is riding quite high up front. Almost a full inch vs the back. I posted this in Audiworld.com and was informed by a memeber that there has been a lot of chatter on this forum about the FSD being the issue. I'm told the perch is welded in the wrong position causing the lack of lowering.

I was hoping to keep to a strut/spring combo vs coilovers.

I did try searching but it came up with zero threads. I'm hoping someone could shed some light on this for me as I'm currently working with the shop and trying to figure this out.

I'll try to post a picture of my car for your viewing pleasure. Nothing overly special.

It's a 2002 180QC, A8 monoblocks, 225 exhaust, 3.2 valance.

Once again, thank you in advance for your help.

Perry

kite
31-05-2008, 09:20 PM
Have you tried over on the TT forum

http://www.tt-forum.co.uk/ttforumbbs/

T3RBO
06-07-2008, 10:41 PM
Is pointing people to other forums the answer to every post, lol