PDA

View Full Version : VAG-COM in Devon/Dorset?



andyc_a401
27-04-2008, 03:22 PM
Hi Guys,

I'm looking for someone with VAG-COM and the know how to do the following on an Audi A4 B6:


Auto lock doors after a certain low speed.
Unlock drivers door first then with a second press, all other doors.
Chirp when locking the car.
Interior dash lights on all the time.


Let me know if you can help and I can pay you in Beer!

dansansome
28-04-2008, 08:54 AM
im not sure vag com will do #4. i think you need vag commander

someone please correct me if im wrong...

Eshrules
28-04-2008, 11:34 AM
the first 3 are simple adaptations via vagcom or a diagnostic tool.

number 4 is more than likely going to require an edit of the eeprom (vagtacho or vag can commander will be required)

:)

elPaulio
28-04-2008, 01:00 PM
No, I'm pretty sure I have read that you can change a coding in Coding 17- Insturments to set either nothing lit up, needles only lit up, scala (Numbers) only lit up or both needles and scala lit up.

I will try and hunt out the correct coding for it.

Paul

elPaulio
28-04-2008, 01:03 PM
Knew I had seen it somewhere!!

Select 17 (Instrument Cluster)
Adaptation -> Function 10

-> Channel 19 (Misc)

xxxx?: Remote Clock

0 - Remote Clock not active
1 - Remote Clock active

xxx?x: Ambient Temperature

0 - no Display, Illumination inactive
1 - Display and Illumination active

xx?xx: Driver Information System (DIS)

0 - DIS 1
1 - Highline without DIS
2 - DIS 2

x?xxx: Board Computer

0 - only Level 2 (long time memory)
1 - Level 1 and 2

?xxxx: Illumination Option

0 - Needle and Scala only active at 'Light on"
1 - Needle already active at 'Ignition on'
2 - Scale already active at 'Ignition on'
3 - Scala (2. Map) and Needle at "ignition on" active

dansansome
28-04-2008, 01:23 PM
glad to be corrected :)

thanks :)

have some rep.

Uwe@Ross-Tech
28-04-2008, 02:47 PM
Knew I had seen it somewhere!!

Select 17 (Instrument Cluster)
Adaptation -> Function 10

-> Channel 19 (Misc)

xxxx?: Remote Clock

0 - Remote Clock not active
1 - Remote Clock active

xxx?x: Ambient Temperature

0 - no Display, Illumination inactive
1 - Display and Illumination active

xx?xx: Driver Information System (DIS)

0 - DIS 1
1 - Highline without DIS
2 - DIS 2

x?xxx: Board Computer

0 - only Level 2 (long time memory)
1 - Level 1 and 2

?xxxx: Illumination Option

0 - Needle and Scala only active at 'Light on"
1 - Needle already active at 'Ignition on'
2 - Scale already active at 'Ignition on'
3 - Scala (2. Map) and Needle at "ignition on" active

It would be nice if you posted the source, in this case:
http://en.openobd.org/audi/a4_8e.htm#17

Note: Illumination Option 3 works on early B6 A4 models, but not necessarily on some of the later ones.

-Uwe-

elPaulio
28-04-2008, 04:38 PM
Hi Uwe,

I would gladly have posted the source if I had been able to find it, I have a copy of this in notepad hence the lack of reference. Many thanks for putting up the link though, I have now added this to my favourites ;)

And Mucho Gracias Dan for your kind rep donation!! ::beerchug::

andyc_a401
28-04-2008, 06:53 PM
Great, I had a leon cupra before the audi and this had the lights on all the time. Surprising what stupid little things you miss!

NikolasZ
12-09-2009, 07:17 AM
Does anyone know how to make this same change on the A3(8P), or the Golf Mk5 ("same" car).