rear bushes

[vwray]

on my golf gt 130 2002 tdi i need rear bushes there is types avalable a bondard rubber 09587 which is a 72mm and a hydro 19928 which is a 69mm type which one do i need.:confused:

[vwray]

Help Any One!

[mobitune]

Haynes manual said to use the solid rubber ones (IIRC they say that the hydro ones are fitted at the factory), they are interchangeable. I am about to tackle mine this weekend, picked up a set yesterday.. Got the tool for installing them, so it'll be up for sale come next weekend.

As a matter of interest what sort of miles on your motor? Do you know if it was mostly urban or motorway driving?
Cheers
Pete

[tornadored7]

Hi Pete,

Best wishes for the Rear Bushes change, hope the job goes well.

If all goes well, please could you keep us posted on your progress ?

Either on this thread, or your original thread; Rear axle bushing replacement (http://www.vwaudiforum.co.uk/forum/showthread.php?t=34110)


A HOW TO guide would be ideal :biglaugh: , but I know all to well it'll be too difficult to work alone and document/take pictures at the same time.

Regards,
TR7

[vwray]

my car has done 145,000 miles , the noise from the back is like your on a rough service all the time, and the handeling is terrible

thanks for the help;)