Spikey
09-03-2008, 02:57 PM
Hello Guys :biglaugh:
I'm hoping someone will be able to help me out. I installed a Pioneer headunit in my Audi A3 as I needed/wanted Ipod & bluetooth handsfree.
I bought the required adaptor lead (I don't think it's from Autoleads) for the audi so sound would go to the rear speakers via the pinoeer headunit's rear pre-outs. When I originally got the lead the pins were on the wrong end of the adaptor plug, I changed these around and sound now comes through the rear speakers.
But the sound is alot lower in volume then if i plug back in the original unit (Audi Concert) back in which is perfect. The remote seems to switch on/off the amp.
Sound from the front speakers is fine, I hand a look at the pin-out on the concert radio and noticed CAN-L, CAN-H & CD-GND are not used in the lead. Are these specific for the concert unit?
Any suggestions?
Cheers,
John
I'm hoping someone will be able to help me out. I installed a Pioneer headunit in my Audi A3 as I needed/wanted Ipod & bluetooth handsfree.
I bought the required adaptor lead (I don't think it's from Autoleads) for the audi so sound would go to the rear speakers via the pinoeer headunit's rear pre-outs. When I originally got the lead the pins were on the wrong end of the adaptor plug, I changed these around and sound now comes through the rear speakers.
But the sound is alot lower in volume then if i plug back in the original unit (Audi Concert) back in which is perfect. The remote seems to switch on/off the amp.
Sound from the front speakers is fine, I hand a look at the pin-out on the concert radio and noticed CAN-L, CAN-H & CD-GND are not used in the lead. Are these specific for the concert unit?
Any suggestions?
Cheers,
John