PDA

View Full Version : Heater matrix reinstall difficulties



narge
18-11-2006, 11:13 PM
Hi to anybody who has replaced a heater matrix in the past !!

Standard 86 Golf GTI K-jet.

Followed the guide/FAQ for removing heater matrix OK.

My problem is trying to get the heater box back in place after swapping out the old matrix with new. I can locate the bottom stud through the bulkhead/firewall but cannot get the top of the heater box passed the vent hose dropping down from the top - in order to then locate the top stud through the bulkhead together with the the matrix feed and return tubes. The heater box just keeps getting stuck on the far side of the vent hose lip nearest the bulkhead. Have tried positioning it without the bottom stud placed through the bulkhead whilst hoping to have more movement to play with - still without success.

Anything I am missing here ?

Thanks for any light shed on this obstacle.

So much for "refitting is a reverse of the removal procedure" http://www.clubgti.com/forum/images/smilies/smiley36.gif